0x800703f1 - Windows Update Error

[theoprastus]

Hi, I stumbled through the rabbit hole regarding this error and found that you guys may know how to fix it. I've tried the common tricks posted on reddit and microsoft but I've hit a dead end. Your help would be greatly appreciated. Biggest problem is, that I can't update my graphics drivers for my AMD PRO W7500...

Kind regards

 

[Maxstar]

Hi and welcome to Sysnative,

Upload your DRIVERS Hive

• Navigate to C:\Windows\System32\config and locate the DRIVERS file.
• Please copy this file to your desktop.
• Note: If you receive an error that this file is in-use, simply reboot your computer and try again.
• Right-click on this file on your desktop and select Send To > Compressed (zipped) folder. This will create a file named DRIVERS.ZIP on your desktop.
• If the file is too large to upload here, upload the file to www.wetransfer.com and post the link in your next reply.

 

[theoprastus]

Hi Maxtar,
thank you for your response. Here's the requested file.

Kind regards

 

[Maxstar]

Hi,

Replace Drivers Hive Manually

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Download DRIVERS.ZIP and save to your desktop.
2. Right-click on it and select Extract all.... Make sure the "Show extracted files when complete" is checked and click Extract.
3. Now we have the DRIVERS file that we will be using to replace your current one.
4. Navigate to C:\Windows\System32\config
5. Right-click on the current DRIVERS file and select rename. Rename it to DRIVERS.bad.
   Note: If you get an error that the file is in use, reboot your computer and then try again.
6. Take the file from the Drivers folder on your desktop and paste it into C:\Windows\System32\config

Afterwards reboot the system and attempt to update. If it fails attach the latest CBS logs and the following logfile.

Upload the setupapi.dev.log file

• Open Windows Explorer and browse to the C:\Windows\INF folder.
• Right-click on the file setupapi.dev.log and choose Send to > Compressed (zipped) folder.
• Now the message will appear, "Windows cannot create the Compressed (zipped) Folder here. Do you want it to be placed on the desktop instead?"
• Click on the Yes button here.

• Attach the file setupapi.dev.zip in your next reply.

 

[theoprastus]

Hi Maxstar,
thank you for the updated drivers file. Unfortunately, updates still don't work. I have attached the requested files.

Kind regards.

 

[Maxstar]

Hi,

Download

Crystal DiskInfo and save it to your Desktop.

• Run the installer to install the program.
• When finished, open the installed program by double clicking on it.
  • Good - There are no problems found, the drive is working properly.
  • Caution - The drive have some problems. (which indicates a drive that you should most likely be thinking about backing up and replacing.)
  • Bad - This usually indicates a drive that’s dead or near death. (! - Back up all important data as soon as possible.)
• Resize the window so that all information is visible.
• Take a screenshot of what you see and post it in your next reply.