Error 0xc000014c

[Maxstar]

Please run the following commands with only the NVMe connected and post the results:

bcdedit /enum
bootrec /scanos

 

[Nonnado]

bcdedit /enum>

Windows Boot Manager
---------------------------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
path \EFI\MICROSOFT\BOOT\BOOTMGFW.EFI
description Windows Boot Manager
locale en-us
inherit {globalsettings}
default {default}
resumeobject {087af714-cc5b-11ef-a37b-9590941426b7}
displayorder {default}
toolsdisplayorder {memdiag}
timeout 30

Windows Boot Loader
--------------------------------------
identifier {default}
device partition=C:
path \Windows\system32\winload.efi
description Windows 10
locale en-us
inherit {bootloadersettings}
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \Windows
resumeobject {087af714-cc5b-11ef-a37b-9590941426b7}
nx OptIn
bootmenupolicy Standard


bootrec /scanos>

Examining all disks for Windows installations.

Please wait, this process may take a while...

Successfully scanned Windows installations.
Total identified Windows installations: 0
The operation completed successfully.

 

[Maxstar]

This looks like if you have run these commands from Windows itself as it seems! This because the result of the Recovery Environment should be different.

So please let us know if you can boot normally now? If so we can start fixing the the remaining issues.

 

[Nonnado]

I executed it via Windows RE with only the hard drive experiencing boot issues connected.

Strange, since it reported "Total identified Windows installations: 0." In this case, wouldn't it mean it's not detecting Windows? Another thing, every time I repair the same system with scandisk, when I boot into Windows, it shows the blue screen attached (it only displays this message once, and it doesn't happen again on the next reboot). After this screen, the error message:

"Logon process initialization failed: Interactive logon process initialization has failed."

​