Windows Server 2022 with failing Windows Updates.

Hmm, this is not a good sign. So please stop the current DISM session and run the following command and copy paste the result in your next post.
Code: 
DISM /online /cleanup-image /AnalyzeComponentStore
 
It didn't work at first. I had to reboot the server (after hours since the server is in production). This is the result. I have attached DISM log as well.


1739930453672.webp
 

Attachments

Hi,

Please run the following command in an elevated prompt and post the result.
Code: 
DISM /online /cleanup-image /StartComponentCleanup
 
Ran the command and it was stuck doing nothing for 12 hours. I then rebooted the server and tried the command. It is now stuck at 10% and not going anywhere.
 
Hi,

Download the
577bf0efb8088-FRST.png
Farbar Recovery Scan Tool and save it to your Desktop:

Download the 64 bit version: - Farbar Recovery Scan Tool Link
  • Note: Your antivirus program may report FRST incorrectly as an infection. If so, disable the real-time protection when downloading and running FRST.
  • Right-click to run the tool as administrator. When the tool opens click Yes to disclaimer.
  • Note: Ensure that the Addition.txt check box is checked at the bottom of the form within the Optional Scan area.
  • Press the Scan button.
  • Please wait for the tool to finish. It will produce two logfiles called FRST.txt and Addition.txt in the same directory the tool is run from (which should be the desktop)
  • Post the logfiles FRST.txt and Addition.txt as attachment in your next reply.
 
kosfury said:
Ran the command and it was stuck doing nothing for 12 hours. I then rebooted the server and tried the command. It is now stuck at 10% and not going anywhere.
Click to expand...
Please run the following command again in an elevated prompt and post the result.
Code: 
DISM /online /cleanup-image /AnalyzeComponentStore
 
It shows the same result, please run the following command again in an elevated prompt and let it run till it fails and post the result.
Code: 
DISM /online /cleanup-image /StartComponentCleanup
 
I rebooted the server and then ran the command as requested. It has been running for 12 hours, stuck at 10%. I have not killed the process.
 
Hmm, it looks like this server (VM installation) is pretty messed up! Do you have backups to restore this server to a previous state before the problem started?
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top