But it also ran just fine installed in the PC for 5 days too. So does it really run just fine in the enclosure, or has it just not acted up - yet?
Handy with a multimeter to see what your voltages are with the system under load?
Acceptable Tolerances:
12VDC ±5% = 11.4 to 12.6VDC
5VDC ±5% = 4.75 to 5.25VDC
3.3VDC ±5% = 3.14 to 3.47VDC
The problem is, it seems intermittent problems always see you coming and don't misbehave when testing. :r1:
What does HWiNFO64 show for your voltages? While software based monitors depend on low-tech sensors, they at least get their readings from the motherboard (after the voltage dividers/regulators) and not the PSU itself.
