DISM error 0x800f0906

phillywells · Jul 10, 2015

So I just happen to run sfc /scannow and it found some errors that it couldn't fix, so I decided to run the DISM tool. I get this error 0x800f0906 and I've made sure that I've enabled component installation and repair in the group policy settings and checked the box next to contact windows update directly beforehand as I see other people doing that with the same problem, so I know that isn't what's wrong. Is there anything I can do to fix these errors?

BrianDrab · Jul 14, 2015

Hi and welcome to Sysnative. Sorry for the delay. If you are still in need of assistance, please do the following.

SFC Scan & Log
1. Right-click on the Start

button and select Command Prompt (Admin)
2. When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
sfc /scannow

3. Once it finishes, copy and paste the following into the command-prompt window and press Enter.
copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"

4. Once this has completed please go to your Desktop and you will find CBS.txt => Please upload CBS.txt to this thread

Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.

phillywells · Jul 15, 2015

View attachment cbs.txt There you go

BrianDrab · Jul 15, 2015

Thanks. Please do the following.

Remove Update Manually
1. Right-click on the Start

button and select Command Prompt (Admin)
2. When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
wusa /uninstall /KB:3000850

3. Let me know if it says it was successful or if there are any errors.

phillywells · Jul 15, 2015

When i tried to uninstall that update, I got this

BrianDrab · Jul 15, 2015

Thanks. When you go to Windows Update does it show any updates to install?

phillywells · Jul 15, 2015

No problem, and yes it is showing updates as of now.

BrianDrab · Jul 15, 2015

Are you able to install them?

phillywells · Jul 15, 2015

Yep, they installed without a problem. Also had to restart afterwards.

BrianDrab · Jul 15, 2015

Cool. Let's do the following again.

SFC Scan & Log
1. Right-click on the Start

button and select Command Prompt (Admin)
2. When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
sfc /scannow

3. Once it finishes, copy and paste the following into the command-prompt window and press Enter.
copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"

4. Once this has completed please go to your Desktop and you will find CBS.txt => Please upload CBS.txt to this thread

Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.

phillywells · Jul 16, 2015

View attachment cbs.txt

BrianDrab · Jul 16, 2015

Thanks. Please do the following.

Step#1 - SFCFix Script
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Download SFCFix.exe (by niemiro) and save this to your Desktop. If you still have this on your desktop from downloading previously, you don't need to re-download.
Download the file below, SFCScript.txt, and save this to your Desktop.
Save any open documents and close all open windows.
On your Desktop, you should see two files: SFCFix.exe and SFCScript.txt.
Drag the file SFCScript.txt onto the file SFCFix.exe and release it.
SFCFix will now process the script.
Upon completion, a file should be created on your Desktop: SFCFix.txt.
Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please

phillywells · Jul 16, 2015

View attachment SFCFix.txt

BrianDrab · Jul 16, 2015

Thank you. Please do the following.

Step#1 - SFCFix Script
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Download SFCFix.exe (by niemiro) and save this to your Desktop. If you still have this on your desktop from downloading previously, you don't need to re-download.
Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
Save any open documents and close all open windows.
On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
SFCFix will now process the script.
Upon completion, a file should be created on your Desktop: SFCFix.txt.
Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please

Step#2 - SFC Scan & Log
1. Right-click on the Start

button and select Command Prompt (Admin)
2. When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
sfc /scannow

3. Once it finishes, copy and paste the following into the command-prompt window and press Enter.
copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"

4. Once this has completed please go to your Desktop and you will find CBS.txt => Please upload CBS.txt to this thread

Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.

Items for your next post
1. SFCFix.txt
2. CBS.txt

Search

Search

DISM error 0x800f0906

phillywells

Member

BrianDrab

Emeritus

phillywells

Member

BrianDrab

Emeritus

phillywells

Member

BrianDrab

Emeritus

phillywells

Member

BrianDrab

Emeritus

phillywells

Member

BrianDrab

Emeritus

phillywells

Member

BrianDrab

Emeritus

Attachments

phillywells

Member

BrianDrab

Emeritus

Attachments