Reply to thread

Greetings,


1) May I ask you temporary remove Malwarebytes via mbam-clean utility and check if the Bsod will appear again.


2) Could you check the second HDD with Crystal DiskInfo.


[CODE]An error was detected on device \Device\Harddisk1\DR2 during a paging operation.

The IO operation at logical block address 0x5bf160 for Disk 1 (PDO name: \Device\00000741) was retried.[/CODE]


Download 520c07ffc7e11-CrystalDiskInfo-Canned.png Crystal DiskInfo and save it to your Desktop.

  • Run the installer to install the program.
  • When finished, openthe installed program by double clicking on it.
    • Good - There are no problems found, the drive is working properly.
    • Caution - The drive have some problems. (which indicates a drive that you should most likely be thinking about backing up and replacing.)
    • Bad - This usually indicates a drive that’s dead or near death. (! - Back up all important data as soon as possible.)
  • Resize the window so that all information is visible.
  • Take a screenshot of what you see and post it in your next reply.


Back
Top