[SOLVED] Server 2022 - error 0x800f081f + 0x80070643

No, but in such cases we'll need to replace multple components.

Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
650c22f99662d-6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards attempt to update, if it fails attach a new copy of the CBS logs.
 

Attachments

Here's the next fix.

Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
650c22f99662d-6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards attempt to update, if it fails attach a new copy of the CBS logs.
 

Attachments

The fix completed successfully, so please reboot the server and attempt to update again.
 
ok i will do so during the night is a prod server.
I'll keep you update tomorrow.


thanks very much for your time and patience
 
You're welcome. And most of the times a reboot will resolve this issue. So I will see the result tomorow..
 
Finally I was able to restart but windows update keep failing with 0x800f0982

1721912382661.png
 

Attachments

Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
650c22f99662d-6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards attempt to update, if it fails attach a new copy of the CBS logs.
 

Attachments

Please upload a new copy of the COMPONENTS hive.

Upload your COMPONENTS hive.
  • Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
  • Please copy this file to your desktop.
  • Note: If you receive an error that this file is in-use, simply reboot your computer and try again.
  • Right-click on this file on your desktop and select Send To > Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
  • If the file is too large to upload here, upload the file to www.wetransfer.com and post the link in your next reply.
 
Please attempt to update again with Process Monitor running.

Step#1 - Capture Process Monitor Trace
1. Download and run Process Monitor. Leave this running while you perform the next steps.
2. Try updating the system just like you have in the past.
3. Stop Process Monitor as soon as it fails. You can simply do this by clicking the capture icon (CTRL +E) on the toolbar as shown below.

Process-Monitor.png


4. Select the File menu...Save... and save the file to your desktop. This is likely the default location. The name (unless changed) will be LogFile.PML. This is fine.
5. Zip up the LogFile.PML and upload it to WeTransfer - Send Large Files & Share Photos Online - Up to 2GB Free and provide the link.
6. Attach also a new copy of the CBS log for the time stamps.
 
Good Morning,

PML file attached.

Windows update indicated same error code and download error instead of yesterday :

1721974816320.png

Thanks
 

Attachments

Good morning too.

Export the Windows Update log
  • Right-click on the Start button and click Windows PowerShell (Admin).
  • Copy and paste the following command into it, press enter afterwards
Code: 
Get-WindowsUpdateLog
  • Wait for the message "WindowsUpdate.log written to C:\Users\<username>\Desktop\WindowsUpdate.log".
  • Attach the logfile WindowsUpdate.log to your next reply.
 
Please run the following commands in an elevated prompt.
Code: 
net stop wuauserv
net stop cryptSvc
net stop bits
ren %SystemRoot%\SoftwareDistribution SoftwareDistribution.old 
net start wuauserv
net start cryptSvc
net start bits
 
You must log in or register to reply here.
Back
Top