2012 R2 - Can't install - undoing changes. RemoveService failed, hr=80248014

[websterd13]

Any update to this issue?

Thanks,

David

 

[Sysnative Windows Update]

Hey, let's try this. Please note that the fix will automatically reboot the Server...


Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.

 

[websterd13]

Crap, still did not work.

Fix result of Farbar Recovery Scan Tool (x64) Version: 13-05-2020 01
Ran by dwadmin (18-05-2020 09:21:34) Run:4
Running from C:\Temp2
Loaded Profiles: dwadmin & ReportServer & MSSQLFDLauncher & SQLSERVERAGENT & MsDtsServer120 & MSSQLSERVER
Boot Mode: Normal
==============================================

fixlist content:
*****************
DeleteValue:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network|Config
Reboot:
*****************

"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\\Config" => removed successfully


The system needed a reboot.

==== End of Fixlog 09:21:34 ====

 

[Sysnative Windows Update]

Let's dig a bit:


FRST Registry Search
1. Click your Start button and type in cmd.
2.After you find the Command Prompt, right click on it and select Run as Administrator.
3. Copy and paste the following into the Command Prompt:

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

4. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
5. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
6. Copy and paste Microsoft-Windows-Kernel-WDI/Operational into the Search box and click the Search Registry button.
7. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.

 

[websterd13]

here you go...

Farbar Recovery Scan Tool (x64) Version: 13-05-2020 01
Ran by dwadmin (20-05-2020 06:40:42)
Running from C:\Temp2
Boot Mode: Normal

================== Search Registry: "Microsoft-Windows-Kernel-WDI/Operational" ===========

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI/Operational]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{2ff3e6b7-cb90-4700-9621-443f389734ed}\ChannelReferences\2]
""="Microsoft-Windows-Kernel-WDI/Operational"

====== End of Search ======

 

[Sysnative Windows Update]

Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
6. Reboot the Server and retry updates.

 

[websterd13]

Fix result of Farbar Recovery Scan Tool (x64) Version: 13-05-2020 01
Ran by dwadmin (20-05-2020 06:55:58) Run:5
Running from C:\Temp2
Loaded Profiles: dwadmin & ISCVSvc & ReportServer & MSSQLFDLauncher & SQLSERVERAGENT & MsDtsServer120 & MSSQLSERVER
Boot Mode: Normal
==============================================

fixlist content:
*****************
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI/Operational]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{2ff3e6b7-cb90-4700-9621-443f389734ed]
*****************

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI/Operational => removed successfully
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{2ff3e6b7-cb90-4700-9621-443f389734ed => not found

==== End of Fixlog 06:55:59 ====

 

[Sysnative Windows Update]

Run this fix as well, I ommitted a bracket.

 

[websterd13]

got it that time. Rebooting then will try update.

fixlist content:
*****************
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{2ff3e6b7-cb90-4700-9621-443f389734ed}]
*****************

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{2ff3e6b7-cb90-4700-9621-443f389734ed} => removed successfully

==== End of Fixlog 07:01:46 ====

 

[websterd13]

Still did not work. Undoing changes...

 

[Sysnative Windows Update]

Please provide CBS.log.

 

[websterd13]

Here you go.

Thanks!

 

[Sysnative Windows Update]

FRST Registry Search
1. Click your Start button and type in cmd.
2.After you find the Command Prompt, right click on it and select Run as Administrator.
3. Copy and paste the following into the Command Prompt:

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

4. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
5. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
6. Copy and paste Microsoft-Windows-Kernel-WDI into the Search box and click the Search Registry button.
7. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.

 

[websterd13]

Farbar Recovery Scan Tool (x64) Version: 13-05-2020 01
Ran by dwadmin (20-05-2020 07:59:50)
Running from C:\Temp2
Boot Mode: Normal

================== Search Registry: "Microsoft-Windows-Kernel-WDI" ===========

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI/Analytic]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI/Debug]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI/Operational]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{2ff3e6b7-cb90-4700-9621-443f389734ed}]
""="Microsoft-Windows-Kernel-WDI"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{2ff3e6b7-cb90-4700-9621-443f389734ed}\ChannelReferences\0]
""="Microsoft-Windows-Kernel-WDI/Analytic"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{2ff3e6b7-cb90-4700-9621-443f389734ed}\ChannelReferences\1]
""="Microsoft-Windows-Kernel-WDI/Debug"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{2ff3e6b7-cb90-4700-9621-443f389734ed}\ChannelReferences\2]
""="Microsoft-Windows-Kernel-WDI/Operational"

====== End of Search ======

 

[Sysnative Windows Update]

Run this fix. Reboot and retry updates.

 

[websterd13]

Missed one

fixlist content:
*****************
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{2ff3e6b7-cb90-4700-9621-443f389734ed}]
*****************

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI => not found
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{2ff3e6b7-cb90-4700-9621-443f389734ed} => removed successfully

==== End of Fixlog 08:13:13 ====

 

[Sysnative Windows Update]

Let's target them manually, one by one.

Then reboot and update.

 

[websterd13]

Got them. rebooting now...

fixlist content:
*****************
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI/Analytic]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI/Debug]
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI/Operational]
*****************

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI/Analytic => removed successfully
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI/Debug => removed successfully
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-Kernel-WDI/Operational => removed successfully

==== End of Fixlog 08:21:23 ====

 

[websterd13]

Still no go...

 

[Sysnative Windows Update]

I'll research and get back to you.

Good night.