[SOLVED] Applying Windows update fails

[PeterJ]

OK.

Open an elevated commandprompt.
Copy and paste the following commands into the commandprompt window and press enter after each.
Bcdedit /set {bootmgr} device partition=\Device\HarddiskVolume3
Bcdedit /deletevalue {bootmgr} path

Post a screenshot of the result.

 

[Benis]

Peter,

Please see the attached screen shot.

Thanks

 

[PeterJ]

Reboot the machine with the old HDD connected.
When Windows starts normally, shutdown and start Windows without the old HDD connected.

 

[Benis]

Peter,

I followed your steps and I unfortunately ran into the same issue as in post 42.

Thanks!

 

[PeterJ]

Open an elevated commandprompt.
Copy and paste the following command into the commandprompt window and press enter.
bcdboot c:\Windows /s G:

Post a screenshot of the result.

 

[Benis]

Peter,

I attempted your step and I received the following message,

 

[PeterJ]

Open an elevated commandprompt.
Copy and paste the following command into the commandprompt window and press enter.
bcdboot c:\Windows /s G: /f ALL

Post a screenshot of the result.

 

[Benis]

Peter,

Please see the following screen shot of the results.

 

[PeterJ]

Something isn't right with the given parameters but it seems valid according to this manual: BCDBoot Command-Line Options
This issue goes beyond my scope.
Please create a new thread in this forum-section: Windows 7 | Windows Vista
Post a link in your first post so other helpers know what already has been done.

 

[Benis]

Peter.

Thank you!

I have made a post on that section, I appreciate everything!!

 

[PeterJ]

Your welcome.

Take care.