DCOM Server Process Launcher high memory usage

Reset Winsock

Click Start and type cmd in the start search box.

From the programs list right click on cmd and select Run as Administrator.

Type netsh winsock reset in the Command Prompt, and then press the Enter key.

Do the same process for refreshing the TCP/IP just replace the typed command with

netsh interface ipv4 reset press Enter

netsh interface ipv6 reset press Enter

ipconfig /flushdns press Enter

Restart your Computer.

Credit- Praseetha K
SOURCE
 
This seems to have negligible effects, Network Location Awareness still says starting and DCOM Server Process Launcher still has high memory usage. Man, this problem is annoying.
 
I think for now we can say that the problem has stopped, if anything changes about this current evaluation I'll say something about it. The worst part is I don't know if it is fixed or if the service is just taking its time. But, thanks for the help it is very appreciated.
 
xrobwx71 said:
In this scenario, we would like you to perform these steps and provide us the information for further investigation.


  1. Open Task Manager and select the Details tab.
  2. Check and note the PID number for svchost.exe that is utilizing the bandwidth.
  3. Now click on Start Menu and type CMD. Right-click on the CMD icon and select Run as administrator.
  4. Copy and paste the command and press enter: tasklist /svc
  5. Now compare the PID number you have noted previously with the list in the command prompt.
  6. Provide us the services name from the command prompt that matches the PID number.




SOURCE CREDIT Aditya_Roy
Click to expand...
1148 BrokerInfrastructure,DcomLaunch,PlugPlay,Power,SystemEventsBroker
 

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top