Scannow and dism not working (windows 10)

Hi here is the files.

Microsoft Windows [Versión 10.0.19042.630]
(c) 2020 Microsoft Corporation. Todos los derechos reservados.

C:\WINDOWS\system32>Dism /Online /Cleanup-Image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.19041.572

Image Version: 10.0.19042.630

[==========================100.0%==========================] The restore operation completed successfully.
The operation completed successfully.
 

Attachments

ok, try windows update again and attach the CBS log if it fails
 
Please do the following

Retrieve Components Hive

1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to a file sharing service. Examples of services to upload to are Dropbox or OneDrive or SendSpace and then just provide the link in your reply.
 
Hi

Please do the following.

Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.

Then try windows update and post CBS log if it fails.
 

Attachments

Hi

Please do the following.

Step#1 - FRST Fix

NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.


Step#2 - DISM /RestoreHealth Scan

Warning:this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Right-click on the Start button and select Command Prompt (Admin)
When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
Dism /Online /Cleanup-Image /RestoreHealth
Once it finishes, copy and paste the following into the command-prompt window and press Enter. If prompted to overwrite the existing file go ahead.
copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
Once this has completed please go to your Desktop and you will find CBS.txt => Please zip/upload to this thread.
Please Note:: if the file is too big (over 7MB) to upload to your next post, please upload via a service such as Dropbox or OneDrive or SendSpace and just provide the link.
 

Attachments

Hi here is the files.

cbs (2).zip

Deployment Image Servicing and Management tool
Version: 10.0.19041.572

Image Version: 10.0.19042.630

[===========================84.9%================= ]
[===========================86.7%================== ]
[===========================88.7%=================== ]
[===========================90.5%==================== ]
[==========================100.0%==========================]
Error: 0x800f081f

The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
 

Attachments

Please do the following.

Step1- SFCFix Script

Warning:
this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put <> tags around the log to break up the text.
then try windows update and attach CBS log if it fails.
 

Attachments

Hi here is the file.

error 0x80073701

Code:
SFCFix version 3.0.2.1 by niemiro.
Start time: 2022-08-01 09:51:28.950
Microsoft Windows 10 Build 19042 - amd64
Using .zip script file at C:\Users\anton.DESKTOP-64P88CC\Desktop\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\WINDOWS\WinSxS\Manifests

Successfully copied file C:\Users\anton.DESKTOP-64P88CC\AppData\Local\niemiro\Archive\Manifests\amd64_microsoft-windows-r..date-oob-deployment_31bf3856ad364e35_10.0.19041.928_none_5316e3c5e51eae06.manifest to C:\WINDOWS\WinSxS\Manifests\amd64_microsoft-windows-r..date-oob-deployment_31bf3856ad364e35_10.0.19041.928_none_5316e3c5e51eae06.manifest.

Successfully restored ownership for C:\WINDOWS\WinSxS\Manifests
Successfully restored permissions on C:\WINDOWS\WinSxS\Manifests
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 1045 datablocks.
Finish time: 2022-08-01 09:56:17.674
Script hash: 8SX85WWoytQg9M8HYZvn4Liv91qU8FgMLxthbme6Ya0=
----------------------EOF-----------------------
 

Attachments

Hi

Apologies for the delay - It's been a really busy last few days.

Please do the following.

Step#1 - FRST Fix

NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.

Step#2 - DISM /RestoreHealth Scan

Warning:this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
Right-click on the Start button and select Command Prompt (Admin)
When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
Dism /Online /Cleanup-Image /RestoreHealth
Once it finishes, copy and paste the following into the command-prompt window and press Enter. If prompted to overwrite the existing file go ahead.
copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
Once this has completed please go to your Desktop and you will find CBS.txt => Please zip/upload to this thread.
Please Note:: if the file is too big (over 7MB) to upload to your next post, please upload via a service such as Dropbox or OneDrive or SendSpace and just provide the link.
 

Attachments

Hi here is the files.

Microsoft Windows [Versión 10.0.19042.630]
(c) 2020 Microsoft Corporation. Todos los derechos reservados.

C:\WINDOWS\system32>Dism /Online /Cleanup-Image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.19041.572

Image Version: 10.0.19042.630

[===========================84.9%================= ]
[===========================85.2%================= ]
[===========================85.5%================= ]
[===========================85.8%================= ]
[===========================86.3%================== ]
[===========================86.6%================== ]
[===========================86.9%================== ]
[===========================87.2%================== ]
[===========================87.6%================== ]
[===========================87.9%================== ]
[===========================88.2%=================== ]
[===========================88.7%=================== ]
[===========================89.0%=================== ]
[===========================89.3%=================== ]
[===========================89.6%=================== ]
[===========================90.0%==================== ]
[===========================90.3%==================== ]
[===========================90.6%==================== ]
[===========================90.9%==================== ]
[===========================91.4%===================== ]
[===========================91.7%===================== ]
[===========================92.0%===================== ]
[==========================100.0%==========================]
Error: 0x800f081f

The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
 

Attachments

Please do the following.

Step1- SFCFix Script

Warning:
this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put <> tags around the log to break up the text.
then try windows update and attach CBS log if it fails.
 

Attachments

Hi here is the files.

error 0x80073701

Code:
SFCFix version 3.0.2.1 by niemiro.
Start time: 2022-08-12 12:49:21.005
Microsoft Windows 10 Build 19042 - amd64
Using .zip script file at C:\Users\anton.DESKTOP-64P88CC\Desktop\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\WINDOWS\WinSxS\Manifests

Successfully copied file C:\Users\anton.DESKTOP-64P88CC\AppData\Local\niemiro\Archive\Manifests\amd64_microsoft-windows-r..-synth3d-deployment_31bf3856ad364e35_10.0.19041.928_none_ddb3b493df984b6c.manifest to C:\WINDOWS\WinSxS\Manifests\amd64_microsoft-windows-r..-synth3d-deployment_31bf3856ad364e35_10.0.19041.928_none_ddb3b493df984b6c.manifest.

Successfully restored ownership for C:\WINDOWS\WinSxS\Manifests
Successfully restored permissions on C:\WINDOWS\WinSxS\Manifests
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 1045 datablocks.
Finish time: 2022-08-12 12:53:17.109
Script hash: VJOJzvVAT13oZlHsyIU2S/iNBXvOcu3+k1u/vptTQUs=
----------------------EOF-----------------------
 

Attachments

Please do the following

Retrieve Components Hive

1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to a file sharing service. Examples of services to upload to are Dropbox or OneDrive or SendSpace and then just provide the link in your reply.
 
Please do the following.

Step#1 - FRST Fix

NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.

Step#2 - DISM /RestoreHealth Scan

Warning:this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
Right-click on the Start button and select Command Prompt (Admin)
When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
Dism /Online /Cleanup-Image /RestoreHealth
Once it finishes, copy and paste the following into the command-prompt window and press Enter. If prompted to overwrite the existing file go ahead.
copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
Once this has completed please go to your Desktop and you will find CBS.txt => Please zip/upload to this thread.
Please Note:: if the file is too big (over 7MB) to upload to your next post, please upload via a service such as Dropbox or OneDrive or SendSpace and just provide the link.
 

Attachments

Hi here is the files.

Microsoft Windows [Versión 10.0.19042.630]
(c) 2020 Microsoft Corporation. Todos los derechos reservados.

C:\WINDOWS\system32>Dism /Online /Cleanup-Image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.19041.572

Image Version: 10.0.19042.630

[===========================84.9%================= ]
[===========================86.1%================= ]
[===========================87.3%================== ]
[===========================88.7%=================== ]
[===========================89.9%==================== ]
[===========================91.1%==================== ]
[==========================100.0%==========================]
Error: 0x800f081f

The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
 

Attachments

Hi

Please do the following.

Step1- SFCFix Script

Warning:
this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put <> tags around the log to break up the text.
then try windows update and attach CBS log if it fails.
 

Attachments

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top