[SOLVED] Server 2012 R2U3 - amd64- DISM and Windows Update Fails

The previous ProcMon log was of that same update. I can still do it if you would like.
 
Install Update with DISM



  1. Download this update and save to your desktop. The file name will be Windows8.1-KB4054519-x64.cab.zip.
  2. Right-click on this file and select Extract All... Click the Extract button. You can close the folder window that opens
  3. Click on the Start button and in the search box, type Command Prompt
  4. When you see Command Prompt on the list, right-click on it and select Run as administrator. Go ahead and allow if you receive the UAC prompt.
  5. Copy and paste the following command into the command prompt window and press enter.

    dism /online /add-package /packagepath:%userprofile%\desktop\Windows8.1-KB4054519-x64.cab
  6. You should receive the message:
    The operation completed successfully.
    Restart Windows to complete this operation. <---You may not get this line.
    Do you want to restart the computer now (Y/N)? <---You may not get this line.



Go ahead and do so if prompted. Let me know what errors if any come up. If you do get errors, please zip/attach your CBS.log
 
Remove Update Manually
 1. Click on the Start button and in the search box, type Command Prompt
2. When you see Command Prompt on the list, right-click on it and select Run as administrator
3. When command prompt opens, copy and paste the following command into it, press enter
wusa /uninstall /KB:4048958

4. Let me know if it says it was successful or if there are any errors.
 
[Window Title]
Windows Update Standalone Installer


[Main Instruction]
Windows Update Standalone Installer


[Content]
Installer encountered an error: 0x80073701


The referenced assembly could not be found.




[OK]
 
FRST Registry Search
 1. Click your Start button and choose Control Panel.
2. In the upper right corner ensure the View by: is set to Category.
3. Select the Programs group.
4. Click the Turn Windows features on or off link. This will bring up the Windows Features dialog. Wait until this dialog populates with information.
Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps.
5. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
6. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
7. Copy and paste KB4048958 into the Search box and click the Search Registry button.
8. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.
9. You may close any remaining open windows now.
​
 
FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Download attached file and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
2. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
3. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
4. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
5. Please retry installing KB4054519 via DISM as previously instructed.
 

Attachments

You're my hero, haha.

Took an hour or two for the fixlist to work. Installed patches a few minutes ago via DISM and KB download and they worked.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top