[SOLVED] sfc has corruption cannot fix

Its my other halfs computer which she does quite a bit of work on so I was making sure it would not fall over
Thanks for all your help, will probably swap files over on Monday
 
Thanks. That worked. Please do the following next.

SFC Scan


  1. Click on the Start
    Start%20Orb.jpg
    button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.

Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.
 
Thanks. There are two corruptions that need fixed. Please do the following.

Step#1 - SFCFix Script
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download SFCFix.exe (by niemiro) and save this to your Desktop. If you still have this on your desktop from downloading previously, you don't need to re-download.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please

Step#2 - SFC Scan


  1. Click on the Start
    Start%20Orb.jpg
    button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.

Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.

Items for your next post
1. SFCFix.txt
2. CBS.txt
 

Attachments

Avast has been reinstalled , for a few days now reinstalled after you sorted the avast manifest problem
Regards
 
We need to remove a couple more manifests.

Code: 
(f) CSI Manifest Missing 0x00000002 amd64_policy.14.0.avast.vc140.crt_fcc99ee6193ebbca_14.0.24210.0_none_499a1b14d5902dfc.manifest amd64_policy.14.0.avast.vc140.crt_fcc99ee6193ebbca_14.0.24210.0_none_499a1b14d5902dfc 
(f) CSI Manifest Missing 0x00000002 amd64_avast.vc140.crt_fcc99ee6193ebbca_14.0.24210.0_none_56aba0211ca246c2.manifest amd64_avast.vc140.crt_fcc99ee6193ebbca_14.0.24210.0_none_56aba0211ca246c2

Please send me an updated components hive.

Retrieve Components Hive
 1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to SendSpace and just provide the link here.
 
Thanks. Please do the following and let me know when complete.

Step#1 - Replace Manually
 1. Download the attached file named COMPONENTS3.ZIP and save to your desktop.
2. Right-click on it and select Extract all.... Make sure the "Show extracted files when complete" is checked and click Extract.
3. Now we have the COMPONENTS file that we will be using to replace your current one.
4. Navigate to C:\Windows\System32\config
5. Right-click on the current COMPONENTS file and select rename. Rename it to COMPONENTS.bad3.
Note: If you get an error that the file is in use, reboot your computer and then try again.
6. Take the file from the Components3 folder on your desktop and paste it into C:\Windows\System32\config

Step#2 - Re-Run SURT and attach log
 
I made another change. Let's do this one more time please.

Step#1 - Replace Manually
 1. Download the attached file named COMPONENTS4.ZIP and save to your desktop.
2. Right-click on it and select Extract all.... Make sure the "Show extracted files when complete" is checked and click Extract.
3. Now we have the COMPONENTS file that we will be using to replace your current one.
4. Navigate to C:\Windows\System32\config
5. Right-click on the current COMPONENTS file and select rename. Rename it to COMPONENTS.bad4.
Note: If you get an error that the file is in use, reboot your computer and then try again.
6. Take the file from the Components4 folder on your desktop and paste it into C:\Windows\System32\config

Step#2 - Re-Run SURT and attach log
 
Thanks. Please do the following.

Step#1 - SFCFix Script
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
  1. Download SFCFix.exe (by niemiro) and save this to your Desktop. If you still have this on your desktop from downloading previously, you don't need to re-download.
  2. Download the file below, SFCScript.txt, and save this to your Desktop.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCScript.txt.
  5. Drag the file SFCScript.txt onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please
 

Attachments

You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top