[SOLVED] Win 7 "WindowsUpdate_80073701" "WindowsUpdate_dt000"

Check Windows Update and report the result.
If important updates are available provide a screenshot first.
 
Install KB890830 only first.
When successful install KB4534310 and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.
 
KB4534310 partly failed. Please do following:

Install Update with DISM
  1. Download the update MSU here: https://catalog.s.download.windowsu..._4dc78a6eeb14e2eac1ede7381f4a93658c8e2cdc.msu
  2. Copy the MSU file to a convenient location (such as C:\temp).
  3. Click on the Start button and in the search box, type Command Prompt
  4. When you see Command Prompt on the list, right-click on it and select Run as administrator
  5. When command prompt opens, copy and paste the following commands into it, press enter after each

    cd C:\temp
    replace C:\temp with your path if different

    expand windows6.1-kb4534310-x64_4dc78a6eeb14e2eac1ede7381f4a93658c8e2cdc.msu -f:* C:\temp

    DISM.exe /Online /Add-Package /PackagePath:C:\temp\windows6.1-kb4534310-x64.cab

  6. You should receive the message:
    The operation completed successfully.
    Make sure to allow the computer to restart if prompted.
  7. If you receive any other message:
    Post a screenshot of the Commandprompt window.
    Zip and attach the file C:\Windows\Logs\CBS\CBS.log
 
Remove Update Manually
  1. Click on the Start button and in the search box, type Command Prompt.
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator.
  3. When command prompt opens, copy and paste the following command into it, then press enter.
    wusa /uninstall /KB:4038777
  4. Let me know if it says it was successful or if there are any errors.
 
ok command completed without errors
BUT
i guess we have a translation issue on windows side here
---------------------------
Programma di installazione Windows Update autonomo
---------------------------
Aggiornamento KB4038777 non installato nel computer.


---------------------------
OK
---------------------------
this is copy\paste from pop up, it literally says "update BK4038777 not installed in computer" I guess is a confirmation for uninstalled
 
Ok.

FRST Registry Search
  1. Click the Start button and choose Control Panel.
  2. In the upper right corner ensure the View by: is set to Category.
  3. Select the Programs group.
  4. Click the Turn Windows features on or off link. This will bring up the Windows Features dialog.
    Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open.
  5. Right-click on the file FRST64.exe and choose Run as administrator.
    Note: Your antivirus program may report FRST incorrectly as an infection. If so, disable the real-time protection when downloading and running FRST.
  6. Copy and paste KB4038777 into the Search box and click the Search Registry button.
  7. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
  8. You may close any remaining open windows now.
 
Hey, i'm running this again this morning as yesterday night my first attempt was not completed after 40 minutes.
Will let this go and come check it later to share the result as soon as possible :)
 
Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.

Step 2:
Restart the machine.
Try to install KB4534310 again and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.
 

Attachments

Provide the Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to Gofile or WeTransfer and just provide the link here.

Option#2 (only if you are unable to follow the previous instructions)

  • Please download the Freeware RegBak from here: Acelogix Software - Download products
     You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
  • Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
  • Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Gofile or WeTransfer and then just provide the link in your reply.
  • You can close any open windows you have as well as the RegBak program now.
 
Export registry as hive
  • Click on the Start button and in the search box, type regedit
  • When you see regedit on the list, right-click on it and select Run as administrator.
  • When regedit opens, using the left pane, navigate to the following registry key and select it by clicking on it once.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing

  • Once selected, click File > Export....
  • Change the Save as type: to Registry Hive Files (*.*).
  • Name this file ComponentBasedServicing (with no file extension) and save it to your Desktop.
  • Right-click on the saved file and choose Send To -> Compressed (zipped) Folder.
  • Attach the .ZIP file to your next post.
  • If the file is too large to upload here, please upload to Gofile or WeTransfer and just provide the downloadlink here.
 
You have added a .reg file which is not what I need.
Please redo the instructions in message #76. (You forgot this "Change the Save as type: to Registry Hive Files (*.*).")
 
Don't worry. We all make mistakes.

Follow the instructions below. If anything is unclear, just ask first.

Click Start typ regedit in the searchbox and press enter.
Allow the program to run.
"Registry-editor" will open. On the leftside browse to the key
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing

Rightclick on it and select Permissions.
A new window opens, click the button Advanced.
A new window opens, select tab Owner.
Put a checkmark at Replace owner on subcontainers and objects
Select Administrators (...) then click Apply and OK.
In the list "Group or user names" select Administrators (...).
Next, put a checkmark to allow "Full Control" and click OK.

Tell me if this was successful or if you got an error.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top