[SOLVED] Windows 10 error 0x80070003

[Sysnative Windows Update]

Any peripheral devices attached besides mouse and keyboard?

 

[laffer98]

0x80070003
This is a failure during SafeOS phase driver installation.
Verify device drivers on the computer, and analyze log files to determine the problem driver.

ok but how do I verify and which one?

 

[Sysnative Windows Update]

See question above.

 

[laffer98]

Ok I've been disconnecting everything..I'm down to the Western Digital SSD and mouse Keyboard

 

[Sysnative Windows Update]

SFCFixScript.txt

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
2. Download the attached file, SFCFixScript.txt, and save this to your Desktop. Ensure that this file is named SFCFixScript.txt - do not rename it.
3. Save any open documents and close all open windows.
4. On your Desktop, you should see two files: SFCFix.exe and SFCFixScript.txt.
5. Drag the file SFCFixScript.txt onto the file SFCFix.exe and release it.
6. SFCFix will now process the script.
7. Upon completion, a log should be created on your Desktop: SFCFix.txt.
8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.[/list]

 

[laffer98]

ok here it is

 

[Sysnative Windows Update]

Zip up all the logs and attach them to your next reply.

 

[laffer98]

These are two of the files identified.... I don't know why search failed to find the setuperr.log that was there in C:\$SysReset\Logs\

 

[laffer98]

Panther log

 

[laffer98]

more

 

[laffer98]

figured out where they were.

 

[laffer98]

ok here is C:\Users\laffer98\Documents\FeedbackHub\{6cabde66-7e8c-411f-bde5-90213725518c}\{6cabde66-7e8c-411f-bde5-90213725518c}_131713087877929478\CopyWindowsPantherLogs

 

[laffer98]

last one because setupact.log zipped to 9,862KB to big to upload.

 

[laffer98]

I cleaned out all the old logs, Ran DISM (both health and restore), ran the windows update repair tool, rebooted and then installed again from ISO. I got to 57% this time before it errored. Attached are the new updated logs.

 

[Sysnative Windows Update]

Uninstall Acronis True Image from the system.

 

[laffer98]

It's not installed. I checked Apps & Features, Control Panel uninstall or change a program, and the Program files directories for it.

 

[Sysnative Windows Update]

Please do the following:

Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.

 

[laffer98]

done

 

[Sysnative Windows Update]

Retry the upgrade.

 

[laffer98]

done, still errors at 55%, I deleted old err logs, rebooted after fix and then installed from ISO. New logs 0 bytes