Windows 10 Upgrade Rabbit Hole

[TheDude]

Too large again. File attached. System Update Readiness Tool?

 

[Sysnative Windows Update]

Yes.

 

[TheDude]

Another good one. Down to triple digits!

 

[Sysnative Windows Update]

Thanks.

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
3. Save any open documents and close all open windows.
4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
6. SFCFix will now process the script.
7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

 

[TheDude]

File attached

 

[Sysnative Windows Update]

System Update Readiness Tool

 

[TheDude]

Getting so close...

 

[Sysnative Windows Update]

Can you retry upgrading now and see if we've fixed enough of the errors for the upgrade to go through?

 

[TheDude]

Different error this time around (which seems like progress)

0x8007042B - 0x2000D
The installation failed in the SAFE_OS phase with an error during MIGRATE_DATA operation

I'm not sure if this is helpful but attached is the setuperr file from C:\$Windows.~BT\Sources\Panther

 

[Sysnative Windows Update]

Please do the following:

FRST Registry Search
1. Click your Start button and type in cmd.
2.After you find the Command Prompt, right click on it and select Run as Administrator.
3. Copy and paste the following into the Command Prompt:

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

4. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
5. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
6. Copy and paste 7.6.7601.18804;11.2.9600.17280 into the Search box and click the Search Registry button.
7. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.

 

[TheDude]

Attached

 

[Sysnative Windows Update]

This will replace the critical files:


SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
3. Save any open documents and close all open windows.
4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
6. SFCFix will now process the script.
7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

 

[TheDude]

I also ran the System Update Readiness Tool and am trying the update now

 

[Sysnative Windows Update]

OK.

 

[TheDude]

No luck. Same error as last time...

 

[Sysnative Windows Update]

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
3. Save any open documents and close all open windows.
4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
6. SFCFix will now process the script.
7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.