[SOLVED] Windows 2019 Server - Unable to run MS Updates

This one seemed to have worked a little better. Its never gone past 70%, this time it went to 73% but then failed. Progress!

Download
 

Attachments

Great, Here's the next fix.

Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
650c22f99662d-6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards attempt to update. If it fails attach a new copy of the CBS logs.
 

Attachments

Here's the next fix.

Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
650c22f99662d-6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards attempt to update. If it fails attach a new copy of the CBS logs.
 

Attachments

Here's the next fix.

Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
650c22f99662d-6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards attempt to update. If it fails attach a new copy of the CBS logs.
 

Attachments

Hi,

And the next fix.

Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
650c22f99662d-6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards attempt to update. If it fails attach a new copy of the CBS logs.
 

Attachments

Good morning.

Here's the next fix.

Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
650c22f99662d-6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards attempt to update. If it fails attach a new copy of the CBS logs.
 

Attachments

oh that one might have fixed me up. Running all kinds of updates.. will reply when done with results :)
 
Morning, after a reboot we have been stuck on the Working on Updates 100% complete page. Tried a few reboots as well and it will still hang. The server is online however.

1715861144379.png
 
Hi,

Please don't perform a (forced) reboot when the update process didn't rollback or showed any errors. Sometimesit may take several hours to complete, so I would attempt to update again and wait a bit longer even if seems that there is no progress anymore.
 
Maxstar said:
Hi,

Please don't perform a (forced) reboot when the update process didn't rollback or showed any errors. Sometimesit may take several hours to complete, so I would attempt to update again and wait a bit longer even if seems that there is no progress anymore.
Click to expand...
This has been running since yesterday at 11AM. Its now 7AM. Still think this needs more time?
 
Please run the following command first.
Code: 
DISM /online /cleanup-image /RestoreHealth
When completed succesfully run the following command and copy and paste the result in your next post.
Code: 
DISM /online /cleanup-image /AnalyzeComponentStore
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top