[SOLVED] Windows 7 can't update to SP1 p2 error 800f081f

D

dime_atomic

Well-known member
Joined
Jul 18, 2019
Posts
47
Hello, can U help me with my problem.

Got Windows 7 ultimate x64, trying install SP1 for it, but error happening.
I was trying System Update Readines Tool in CheckSUR.log no errors.
SFCfix also no errors.

Attached logs.
Would be appreciated for any help.
 

Attachments

Hi,

Retrieve Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to SendSpace and just provide the link here.


Option#2 (only if you are unable to follow the previous instructions)

  • Please download the Freeware RegBak from here: Acelogix Software - Download products
     You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
  • Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
  • Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Filedropper or One Drive or SendSpace and then just provide the link in your reply.
  • You can close any open windows you have as well as the RegBak program now.
 
Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the Farbar Recovery Scan Tool and save it to your Desktop:
    64-bit: Downloading Farbar Recovery Scan Tool
  2. Download the attachment fixlist.txt and save it to your desktop.
  3. Right-click on FRST64.exe and select "Run as administrator".
  4. Press the Fix button.
  5. The tool will now process fixlist.txt.
  6. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  7. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  8. Post the logfile Fixlog.txt as attachment in your next reply.

Step 2:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download the attachment SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.
 

Attachments

WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download the attachment SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.
 

Attachments

WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download the attachment SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.
 

Attachments

ChkDsk Scan
  • Click on Start - All programs - Accessories.
  • Rightclick on Command-prompt and select Run as administrator.
  • When command prompt opens, typ chkdsk into it, then press enter.
  • Wait for this to complete.
  • Download ListChkdskResult.exe by SleepyDude and save it on your desktop.
  • Rightclick
    58a60a47ed1bd-ListChkdskResult.PNG
    ListChkdskResult.exe and select Run as administrator. Notepad will open the file ListChkdskResult.txt on completion. (The file ListChkdskResult.txt can be found on your desktop.)
  • Copy and paste its content in your next reply.
 
ListChkdskResult by SleepyDude v0.1.7 Beta | 21-09-2013

------< Log generate on 15.08.2019 21:21:30 >------
Category: 0
Computer Name: glavbuhpc
Event Code: 26212
Record Number: 58770
Source Name: Chkdsk
Time Written: 08-15-2019 @ 18:19:38
Event Type: Сведения
User:
Message: Программа Chkdsk была запущена на моментальном снимке тома в режиме "только чтение".

Проверка файловой системы на C:
Тип файловой системы: NTFS.

ВНИМАНИЕ! Параметр F не указан.
CHKDSK выполняется в режиме только чтения.

Проверка файлов (этап 1 из 3)...
Обработано файловых записей: 331264.

Проверка файлов завершена.
Обработано больших файловых записей: 265.

Обработано поврежденных файловых записей: 0.

Обработано записей дополнительных атрибутов: 2.

Обработано записей повторного анализа: 66.

Проверка индексов (этап 2 из 3)...
Обработано записей индекса: 383482.

Проверка индексов завершена.
Проверено неиндексированных файлов: 0.

Восстановлено неиндексированных файлов: 0.

Проверка дескрипторов безопасности (этап 3 из 3)...
Обработано файловых SD/SID: 331264.

Очистка от неиспользуемых индексных записей 1758 в индексе $SII файла 0x9.
Очистка от неиспользуемых индексных записей 1758 в индексе $SDH файла 0x9.
Очистка 1758 неиспользованных дескрипторов безопасности.
Проверка дескрипторов безопасности завершена.
Обработано файлов данных: 26110.

CHKDSK проверяет журнал USN..
Обработано байтов USN: 35687920.

Завершена проверка журнала USN
Windows проверила файловую систему. Ошибок не обнаружено.

204698285 КБ всего на диске.
75883448 КБ в 151395 файлах.
108208 КБ в 26111 индексах.
0 КБ в поврежденных секторах.
454093 КБ используется системой.
65536 КБ занято под файл журнала.
128252536 КБ свободно на диске.

Размер кластера: 4096 байт.
Всего кластеров на диске: 51174571.
32063134 кластеров на диске.

-----------------------------------------------------------------------
 
The following might take several hours to complete. You can do it overnight if you like.

Click on Start - All Programs - Accessories.
Right-click on Command-prompt and select Run as administrator.
When command prompt opens, copy and paste the following command into it, press enter afterwards.

Code: 
chkdsk c: /f /r
At the question "Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)", press Y.
Restart the system.

Do not press any key during the restart. This will allow CHKDSK to start.
Wait for this to complete. Please note that this may take several hours. Let it run even if it looks like the process has stopped!
On completion, the system will restart automatically.
 
Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download the attachment SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.

Step 2:
Check Windows Update again and report the result.
If it fails, attach the zipped cbs.log to your next reply.
 

Attachments

WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download the attachment SFCFixScript.txt and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFixScript.txt file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.
 

Attachments

SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-08-19 22:38:13.442
Microsoft Windows 7 - amd64
Using .txt script file at C:\Users\glavbuh\Desktop\SFCFixScript.txt [0]




FileScan::
[0: 1] C:\Windows\winsxs\amd64_microsoft-windows-o..adisc-style-shatter_31bf3856ad364e35_6.1.7600.16385_none_0cd72f8900478c68.manifest
File is untraceable.
Found: isCafl+439N/IQgvi22CQEI14c1FzQYgW2kAxEalYrU=
Version number not available.
Trace not available.
FileScan:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 4011 datablocks.
Finish time: 2019-08-19 22:38:15.589
Script hash: qoUlUJvFt4dNbjTIV+Azi7lVF6PoihkHlcwCUmkr92A=
----------------------EOF-----------------------
 
FRST File Search
  1. Right-click on the file FRST64.exe and choose Run as administrator.
  2. Copy and paste amd64_microsoft-windows-o..adisc-style-shatter_31bf3856ad364e35_6.1.7600.16385_none_0cd72f8900478c68.manifest into the Search box and click the Search Files button.
  3. When the scan is complete, a message will display that 'Search.txt' is saved in the same folder FRST was started from. Notepad will open this file also.
  4. Close Notepad and attach the file 'Search.txt' to your next reply.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top