[SOLVED] [8.1Upd3 x64] KB4056895 and other installation problems

Re: KB4056895 and other installation problems

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.



  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put tags around the log to break up the text.
  9. Afterwards run DISM again and attach CBS.log
 

Attachments

Re: KB4056895 and other installation problems

Here's SFCFix.txt file and CBS.zip log files.
Tried to run update again (twice) and KB4074594 fail to finalize.
 

Attachments

Re: KB4056895 and other installation problems

After downloading KB4074595 and installing. The computer was restarted and the computer stated that "We couldn't complete the update Getting ready to retry" After restarting twice the computer showed:
"Getting computer ready
Undoing changes".
That's what I mean by finalizing the installation. I will explain myself better next time.
Here's new CBS.zip log file as requested. Cheers.
 

Attachments

Re: KB4056895 and other installation problems

Sorry it didn't make any difference with firewall off.

Turned firewall off.
I checked for updates, downloaded KB4074594 which was installed and restarted the PC to finish installing. After restarting several times get message--We couldn't complete the update--Undoing changes.
Then turned firewall back on.
Doug
 
Re: KB4056895 and other installation problems

Darn forgot all about Windows Defender. So ran update with Windows Defender turned off. Same result "We couldn't complete the updates---Undoing changes".
Doug
 
Re: KB4056895 and other installation problems

It is clean, did not see any black exclamation point on a yellow background, similar to a caution sign.
 
Re: KB4056895 and other installation problems

Step#1 - FRST Scan
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Right click to run as administrator. When the tool opens click Yes to disclaimer.
3. Please ensure you place a check mark in the Addition.txt check box at the bottom of the form before running (if not already).
4. Press Scan button.
5. It will produce a log called FRST.txt in the same directory the tool is run from (which should now be the desktop)
6. Please copy and paste log back here.
7. Another log (Addition.txt - also located in the same directory as FRST64.exe) will be generated Please also paste that along with the FRST.txt into your reply.
 
Re: KB4056895 and other installation problems

Here's zip file for setupapi.dev.log. If it would solve this 8.1 update problem I'm okay with upgrading to Windows 10 but like to get the Pro version, as it would solve some other computer problems.
 

Attachments

Re: KB4056895 and other installation problems

FYI. When I update the driver it says best driver for Standard SATA AHCI Controller is already installed.
 
Re: KB4056895 and other installation problems

Have you tried checking the official MB manufacturer's support page? If you need assistance with this step, let me know.
 
Re: KB4056895 and other installation problems

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the attached file, SFCFixScript.txt, and save this to your Desktop. Ensure that this file is named SFCFixScript.txt - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFixScript.txt.
  5. Drag the file SFCFixScript.txt onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a log should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.
 

Attachments

You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top