[SOLVED] [8 x64, NO updates] SFC unable to fix corrupt files; DISM error 1812.

Go back into C:\Windows\servicing\version and inside create a folder named 6.2.9200.17516.

If successful, do the following:

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.


If both steps have suceeded, please run DISM again and attach both dism.log and CBS.log.
 

Attachments

Hi. I can't create a new folder in C:\Windows\servicing\version, "Destination folder access is denied".
 
FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download attached file and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
 

Attachments

Hi. Here's the result.
Thank you.

Code: 
[/COLOR]Fix result of Farbar Recovery Scan Tool (x64) Version: 04.03.2018Ran by super (06-03-2018 09:48:03) Run:3
Running from C:\Users\super\Desktop
Loaded Profiles: super (Available Profiles: MINECRAFT & super & Administrator)
Boot Mode: Normal
==============================================


fixlist content:
*****************
RestoreQuarantine: C:\FRST\Quarantine\C\Windows\Servicing\Version\6.2.9200.17516
*****************


RestoreQuarantine: C:\FRST\Quarantine\C\Windows\Servicing\Version\6.2.9200.17516=> Restoring from Quarantine completed.



==== End of Fixlog 09:48:03 ====[COLOR=#333333]
 
I'm thinking of just restoring the PC to its factory settings. Will this solve the problems with Windows? Also, the hard drive has a separate partition for the system and the storage, will the files in storage remain intact after esetting to factory settings? Thanks.
 
If it were up to me, I'd go with your process, but the owner of the PC is planning to get the machine next week. I don't think we'll have enough time.
I'll try to reset the PC and let you know what happens. Thank you.
 
Just to be clear, you've been very helpful and I felt we were making progress. I am very thankfull. It's just that we didn't have enough time.
I will give you an update.
 
Hi. I successfully reset the PC to factory settings and upgraded to Windows 8.1. So far, everything seems to be going fine. I won't upgrade it to Windows 10, I'll leave it to them to do the upgrade.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top