MingoMongo
Well-known member
Unfortunately, no crashes from verifier over that time. Did disk clean, clean boot and got the same BSOD. SetupDiag log shows no failures. I will do a fresh install if it comes to it, but I'm holding out.
[SOLVED] BSOD on W7 upgrade to W10 & in driver verifier, no dumps. FIX: FEW drivers (and devices) removed; TPKD was the last one which blocked the upgrade.
- Thread starter MingoMongo
- Start date
And is a dump available?
Re-try verifier with these parameters:
Code:
verifier /flags 0x00100fbf /driver amdxata.sys,atmfd.dll,btath_a2dp.sys,btath_bus.sys,btath_flt.sys,btath_hcrp.sys,btath_lwflt.sys ,btath_rcp.sys,btfilter.sys,e1c62x64.sys,hecix64.sys,iastora.sys,iastorf.sys,igdkmd64.sys,jraid.sys,lvrs64.sys,lvuvc64.sys,mv91cons.sys,mvs91xx.sys,mvxxmm.sys,ndis.sys,nusb3hub.sys,nusb3xhc.sys,nvhda64v.sys,nvlddmkm.sys,nvmoduletracker.sys,nvvad64v.sys,nvvhci.sys,rt64win7.sys,rtkvhd64.sys,scsiport.sys,tapwindscribe0901.sys,tpkd.sys,vhhcd.sys,vhhub.sysLet me see the settings:
Code:
verifier /querysettingsMingoMongo
Well-known member
Nope no dumps again 
Are .log files available in c:\$Windows.~BT\Sources\Panther ?
If yes, zip them up and attach them here.
If yes, zip them up and attach them here.
MingoMongo
Well-known member
When performing the last windows upgrade was it done with the upgrade assistant, windows 10 iso on the desktop or a bootable windows 10 iso?
This is an upgrade checklist: (modified for upgrading 7 to 10)
This is an upgrade checklist: (modified for upgrading 7 to 10)
Code:
UPGRADE CHECK LIST:
Run through this check list before the next upgrade attempt:
1) remove nonessential hardware
docks
USB devices
printers
headset
speakers
joysticks
projectors
scanners
plotters
portable optical drives (CD, DVD)
microphones
cameras
webcams
smartphones
bluetooth devices
USB drives (other than a windows 10 iso if used for the upgrade)
USB Wireless Mouse or Keyboard Receiver, USB Wireless Network Card
secondary monitors
2) These should be the only attached devices:
wired mouse
wired keyboard
monitor
Any of these that have been done in the past week are not necessary to repeat:
3) open administrative command prompt and type or copy and paste: (repair file system)
chkdsk /r /v C:
This may take many hours so plan to run overnight
Find the chkdsk report in the event viewer using the information in this link and post into the thread:
https://www.sevenforums.com/tutorials/433-disk-check.html
https://www.sevenforums.com/tutorials/96938-check-disk-chkdsk-read-event-viewer-log.html
4) open administrative command prompt and copy and paste: (repair operating system)
sfc /scannow
When this has completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
5) update windows (have all recommended updates installed) and reboot after updates
6) List and uninstall all non-Microsoft antivirus software
(This includes always on and manual software.)
(This includes running the applicable antivirus uninstall tools for any AV that could have been incompletely uninstalled)
https://www.bitdefender.com/consumer/support/answer/2625/
(And this includes uninstalling Microsoft Security Essentials (MSE) immediately before the upgrade attempt)
7) List and uninstall all non-Microsoft firewall software
8) List all Microsoft and non-Microsoft drive encryption software.
Uninstall all non-Microsoft disk encryption software
9) Run disk cleanup to clean temporary and system files
https://www.sevenforums.com/tutorials/818-disk-cleanup-open-use.html
10) Create and verify that the drive has > 30 GB free space (At least 25 GB is needed for maintaining certain dump files)
https://www.sevenforums.com/tutorials/129976-hard-disk-space-free-up-recover.html
https://www.sevenforums.com/tutorials/274797-disk-management-post-screen-capture-image.html
11) Consider placing the computer in clean startup:
https://www.sevenforums.com/tutorials/179159-troubleshoot-application-conflicts-performing-clean-startup.html
12) Detach all SATA devices other than the disk drive that has the Windows operating system
(Make sure that the only disk drive that is attached to the computer at the time of the upgrade attempt is the disk drive containing Windows)
(Other disk drives may be able to be detached by disconnecting cables or if necessary to remove the drive from the computer)
13) Make sure that there is no metered connection: https://support.microsoft.com/en-us/help/17452/windows-metered-internet-connections-faq
14) Consider making a free backup image:
https://www.sevenforums.com/tutorials/73828-imaging-free-macrium.html
https://www.sevenforums.com/tutorials/218920-macrium-reflect-create-bootable-rescue-usb-drive.html
15) Test the drive:
https://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html
Crystal Disk standard edition:
https://crystalmark.info/en/software/crystaldiskinfo/MingoMongo
Well-known member
Sorry I forgot to run it from an iso. I can't do it on desktop since I was told to delete all my iso opening applications, forgot you could run an iso from a mem stick. I did the "install onto flash drive" and opened it in Windows since you can't use it to upgrade when it's the boot drive.
I'll do the things in that list then give it a go that way.
I'll do the things in that list then give it a go that way.
MingoMongo
Well-known member
Chkdsk:
sfc /scannow
sfc /scannow
- Hardware disconnected
- Update windows: Installed all updates recently
- No antivirus unless you count Malwarebytes. I believe all traces of old AV are gone by doing it manually a while ago, using uninstall tools didn't work for me. I never installed MSE.
- No non-microsoft firewalls
- No encryption software besides Samsung Magician which is not in use
- Disk cleanup ran earlier today
- Disk has space
- Backup image has been made
- Harddrive is very new and Samsung Magician scan is clear
- No metering, all updates happen automatically
MingoMongo
Well-known member
Correction: Am doing it with a desktop iso I opened with WinRAR, can't figure out how to do the boot option. I can make the installer on the flash drive but it tells me I can't upgrade with it.
MingoMongo
Well-known member
Same again. Same blue screen, no crash logs, no SetupDiag found no errors.
Repair Install Windows 10 with an In-place Upgrade
Bootable ISO - Create from Installation Files - Windows 7 Help Forums
Upgrade to Windows 10 from Windows 7 for Free
Clean Install Windows 10 Directly without having to Upgrade First
Upgrade to Windows 10
Repair Install - Windows 7 Help Forums
Custom Install Windows 7 - Windows 7 Help Forums
Post new:
c:\$Windows.~BT\Sources\Panther
SetupDiag - Windows Deployment | Microsoft Docs
What was the latest error message and code?
Was the desktop or flash drive iso used for the upgrade?
Post new Sysnative log collector results.
Bootable ISO - Create from Installation Files - Windows 7 Help Forums
Upgrade to Windows 10 from Windows 7 for Free
Clean Install Windows 10 Directly without having to Upgrade First
Upgrade to Windows 10
Repair Install - Windows 7 Help Forums
Custom Install Windows 7 - Windows 7 Help Forums
Post new:
c:\$Windows.~BT\Sources\Panther
SetupDiag - Windows Deployment | Microsoft Docs
What was the latest error message and code?
Was the desktop or flash drive iso used for the upgrade?
Post new Sysnative log collector results.
Last edited:
MingoMongo
Well-known member
SetupDiag collection
Who Crashed hasn't found any new crash logs since I did the cleanup of the drive, so not sure what the Sys collector will find.
I used desktop iso, using the flash drive option was giving me issues.
I believe the error message was the same as always:
"0xC1900101 - 0x40017, The installation failed in the SECOND_BOOT phase with an error during BOOT operation"
I will be trying the repair option tomorrow :)
The error code from the latest failed Windows upgrade was:
This error code is commonly related to problem drivers.
Uninstall: IObit\Driver Booster
Which drivers were installed with third party software?
Earlier logs had displayed driver problems.
1) Open administrative command prompt (ACP) and type or copy and paste:
sigverif
2) When this has completed > view the popup > post images into the thread
Can you identify:
Code:
0xC1900101, 0x40017This error code is commonly related to problem drivers.
Uninstall: IObit\Driver Booster
Which drivers were installed with third party software?
Earlier logs had displayed driver problems.
1) Open administrative command prompt (ACP) and type or copy and paste:
sigverif
2) When this has completed > view the popup > post images into the thread
Can you identify:
Code:
2020-12-11 19:36:00, Warning [0x080998] MIG Failed to get properties of C:\Users\Jay\AppData\Roaming\Microsoft\Windows\Recent\ようこそスケベエルフの森へ.ISO.lnk
Code:
2020-12-11 19:43:54, Warning [SetupPlatform.exe] Get Os info for boot entry returned corrupt information.
2020-12-11 19:21:28, Warning SYSPRP SPPNP: Driver package xusb21.inf_amd64_b8916a1e19aec16a (oem17.inf) has unknown signer.
2020-12-11 19:21:28, Warning SYSPRP SPPNP: Driver package vbvmvaio64_win7.inf_amd64_98635c590be27e38 (oem22.inf) has unknown signer
2020-12-11 19:21:28, Warning SYSPRP SPPNP: Driver package vbmmecable64_win7.inf_amd64_ffa78ae84c13ca8c (oem113.inf) has unknown signer.
2020-12-11 19:21:28, Warning SYSPRP SPPNP: Driver package tevirtualmidi.inf_amd64_2704b1a8405dfbcf (oem38.inf) has unknown signer.
2020-12-11 19:21:28, Warning SYSPRP SPPNP: Driver package oemvista.inf_amd64_6f19c527a306dd1d (oem48.inf) has unknown signer.
2020-12-11 19:21:28, Warning SYSPRP SPPNP: Driver package ilokdrvr64.inf_amd64_e9740db1b25c3063 (oem125.inf) has unknown signer.
2020-12-11 19:21:28, Warning SYSPRP SPPNP: Driver package vhhcd.inf_amd64_f894f75020ec4dc6 (oem14.inf) has unknown signer.
2020-12-11 19:21:28, Warning SYSPRP SPPNP: Driver package vhhub.inf_amd64_1a3c52656d767b6c (oem117.inf) has unknown signer.
2020-12-11 19:21:28, Warning SYSPRP SPPNP: Driver package wup-028.inf_amd64_c611e772c93bd6a4 (oem51.inf) has unknown signer.
2020-12-11 19:21:28, Warning SYSPRP SPPNP: Driver package push2_display.inf_amd64_71951f00f0a6cd7d (oem32.inf) has unknown signer.
2020-12-11 19:21:28, Warning SYSPRP SPPNP: Driver package bazisvirtualcdbus.inf_amd64_18ec2ff4b04883c1 (oem88.inf) has unknown signer.
Code:
>>> [Device Install (Hardware initiated) - BTHENUM\{00001801-0000-1000-8000-00805f9b34fb}_VID&0001001d_PID&1200\8&2430de07&0&BC98DF33882A_C00000000]
>>> Section start 2020/12/08 21:29:44.197
ump: Creating Install Process: DrvInst.exe 21:29:44.197
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Searching just Driver Store...
dvi: {Build Driver List} 21:29:44.206
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'C:\Windows\INF'
dvi: {Build Driver List - exit(0x00000000)} 21:29:44.250
ndv: Selecting best match from just Driver Store...
dvi: {DIF_SELECTBESTCOMPATDRV} 21:29:44.250
dvi: No class installer for 'Bluetooth Peripheral Device'
dvi: No CoInstallers found
dvi: Default installer: Enter 21:29:44.251
dvi: {Select Best Driver}
! dvi: Selecting driver failed(0xe0000228)
dvi: {Select Best Driver - exit(0xe0000228)}
! dvi: Default installer: failed!
! dvi: Error 0xe0000228: There are no compatible drivers for this device.
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 21:29:44.252
ndv: Searching Windows Update for drivers... 21:29:44.259
ndv: Waiting for previous WU search to complete. 21:29:44.259
ndv: Acquired WU search serialization mutex. 21:30:07.593
ndv: About to release WU search serialization mutex. 21:30:15.461
ndv: No driver found on Windows Update. 21:30:15.461
ndv: Searching Driver Store and Device Path...
dvi: {Build Driver List} 21:30:15.461
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'C:\Windows\inf'
dvi: {Build Driver List - exit(0x00000000)} 21:30:15.523
ndv: Selecting best match from Driver Store (including Device Path)...
dvi: {DIF_SELECTBESTCOMPATDRV} 21:30:15.524
dvi: No class installer for 'Bluetooth Peripheral Device'
dvi: Default installer: Enter 21:30:15.524
dvi: {Select Best Driver}
! dvi: Selecting driver failed(0xe0000228)
dvi: {Select Best Driver - exit(0xe0000228)}
! dvi: Default installer: failed!
! dvi: Error 0xe0000228: There are no compatible drivers for this device.
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 21:30:15.525
ndv: {Core Device Install} 21:30:15.526
! ndv: Installing NULL driver!
dvi: Set selected driver complete.
dvi: {DIF_ALLOW_INSTALL} 21:30:15.527
dvi: No class installer for 'Bluetooth Peripheral Device'
dvi: Default installer: Enter 21:30:15.528
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 21:30:15.528
dvi: {DIF_INSTALLDEVICE} 21:30:15.528
dvi: No class installer for 'Bluetooth Peripheral Device'
dvi: Default installer: Enter 21:30:15.529
! dvi: Installing NULL driver!
dvi: Writing common driver property settings.
dvi: {Restarting Devices} 21:30:15.540
dvi: Restart: BTHENUM\{00001801-0000-1000-8000-00805F9B34FB}_VID&0001001D_PID&1200\8&2430DE07&0&BC98DF33882A_C00000000
dvi: {Restarting Devices exit} 21:30:15.546
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 21:30:15.547
ndv: Device install status=0xe0000203
ndv: Performing device install final cleanup...
! ndv: Queueing up error report since device installation failed...
ndv: {Core Device Install - exit(0xe0000203)} 21:30:15.548
ump: Server install process exited with code 0xe0000203 21:30:15.550
<<< Section end 2020/12/08 21:30:15.556
<<< [Exit status: FAILURE(0xe0000203)]
Code:
>>> [Device Install (Hardware initiated) - NUSB3\ROOT_HUB30\5&1b89085f&2]
>>> Section start 2020/10/15 17:24:45.572
ump: Creating Install Process: DrvInst.exe 17:24:45.572
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Searching just Driver Store...
dvi: {Build Driver List} 17:24:45.572
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'C:\Windows\INF'
dvi: {Build Driver List - exit(0x00000000)} 17:24:45.619
ndv: Selecting best match from just Driver Store...
dvi: {DIF_SELECTBESTCOMPATDRV} 17:24:45.619
dvi: No class installer for 'Unknown driver software package'
dvi: No CoInstallers found
dvi: Default installer: Enter 17:24:45.619
dvi: {Select Best Driver}
! dvi: Selecting driver failed(0xe0000228)
dvi: {Select Best Driver - exit(0xe0000228)}
! dvi: Default installer: failed!
! dvi: Error 0xe0000228: There are no compatible drivers for this device.
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 17:24:45.619
ndv: Searching Windows Update for drivers... 17:24:45.619
ndv: Waiting for previous WU search to complete. 17:24:45.619
ump: Creating Install Process: DrvInst.exe 16:41:21.893
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Searching just Driver Store...
dvi: {Build Driver List} 16:41:21.893
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'C:\Windows\INF'
dvi: {Build Driver List - exit(0x00000000)} 16:41:21.940
ndv: Selecting best match from just Driver Store...
dvi: {DIF_SELECTBESTCOMPATDRV} 16:41:21.940
dvi: No class installer for 'Unknown driver software package'
dvi: No CoInstallers found
dvi: Default installer: Enter 16:41:21.940
dvi: {Select Best Driver}
! dvi: Selecting driver failed(0xe0000228)
dvi: {Select Best Driver - exit(0xe0000228)}
! dvi: Default installer: failed!
! dvi: Error 0xe0000228: There are no compatible drivers for this device.
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 16:41:21.940
ndv: Searching Windows Update for drivers... 16:41:21.956
ndv: Waiting for previous WU search to complete. 16:41:21.956
ndv: Acquired WU search serialization mutex. 16:41:35.683
ndv: About to release WU search serialization mutex. 16:41:43.576
ndv: No driver found on Windows Update. 16:41:43.577
ndv: Searching Driver Store and Device Path...
dvi: {Build Driver List} 16:41:43.578
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'C:\Windows\inf'
dvi: {Build Driver List - exit(0x00000000)} 16:41:43.640
ndv: Selecting best match from Driver Store (including Device Path)...
dvi: {DIF_SELECTBESTCOMPATDRV} 16:41:43.642
dvi: No class installer for 'Unknown driver software package'
dvi: Default installer: Enter 16:41:43.643
dvi: {Select Best Driver}
! dvi: Selecting driver failed(0xe0000228)
dvi: {Select Best Driver - exit(0xe0000228)}
! dvi: Default installer: failed!
! dvi: Error 0xe0000228: There are no compatible drivers for this device.
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 16:41:43.646
ndv: {Core Device Install} 16:41:43.647
! ndv: Installing NULL driver!
dvi: Set selected driver complete.
dvi: {DIF_ALLOW_INSTALL} 16:41:43.660
dvi: No class installer for 'Unknown driver software package'
dvi: Default installer: Enter 16:41:43.661
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 16:41:43.662
dvi: {DIF_INSTALLDEVICE} 16:41:43.662
dvi: No class installer for 'Unknown driver software package'
dvi: Default installer: Enter 16:41:43.663
! dvi: Installing NULL driver!
dvi: Writing common driver property settings.
! dvi: Failed to set Device Description property: (null)
! dvi: Error 1784: The supplied user buffer is not valid for the requested operation.
dvi: {Restarting Devices} 16:41:43.677
dvi: Restart: NUSB3\ROOT_HUB30\5&1B89085F&2
dvi: {Restarting Devices exit} 16:41:43.680
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 16:41:43.681
ndv: Device install status=0xe0000203
ndv: Performing device install final cleanup...
! ndv: Queueing up error report since device installation failed...
ndv: {Core Device Install - exit(0xe0000203)} 16:41:43.683
ump: Server install process exited with code 0xe0000203 16:41:43.686
<<< Section end 2020/11/30 16:41:43.692
Code:
>>> [Device Install (Hardware initiated) - NUSB3\ROOT_HUB30\5&174fc82c&2]
>>> Section start 2020/10/15 17:24:45.400
ump: Creating Install Process: DrvInst.exe 17:24:45.400
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Searching just Driver Store...
dvi: {Build Driver List} 17:24:45.400
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'C:\Windows\INF'
dvi: {Build Driver List - exit(0x00000000)} 17:24:45.447
ndv: Selecting best match from just Driver Store...
dvi: {DIF_SELECTBESTCOMPATDRV} 17:24:45.447
dvi: No class installer for 'Unknown driver software package'
dvi: No CoInstallers found
dvi: Default installer: Enter 17:24:45.447
dvi: {Select Best Driver}
! dvi: Selecting driver failed(0xe0000228)
dvi: {Select Best Driver - exit(0xe0000228)}
! dvi: Default installer: failed!
! dvi: Error 0xe0000228: There are no compatible drivers for this device.
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 17:24:45.463
ndv: Searching Windows Update for drivers... 17:24:45.494
ndv: Acquired WU search serialization mutex. 17:24:45.494
ump: Creating Install Process: DrvInst.exe 16:41:21.691
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Searching just Driver Store...
dvi: {Build Driver List} 16:41:21.706
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'C:\Windows\INF'
dvi: {Build Driver List - exit(0x00000000)} 16:41:21.769
ndv: Selecting best match from just Driver Store...
dvi: {DIF_SELECTBESTCOMPATDRV} 16:41:21.769
dvi: No class installer for 'Unknown driver software package'
dvi: No CoInstallers found
dvi: Default installer: Enter 16:41:21.769
dvi: {Select Best Driver}
! dvi: Selecting driver failed(0xe0000228)
dvi: {Select Best Driver - exit(0xe0000228)}
! dvi: Default installer: failed!
! dvi: Error 0xe0000228: There are no compatible drivers for this device.
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 16:41:21.769
ndv: Searching Windows Update for drivers... 16:41:21.784
ndv: Acquired WU search serialization mutex. 16:41:21.784
ndv: About to release WU search serialization mutex. 16:41:35.632
ndv: No driver found on Windows Update. 16:41:35.633
ndv: Searching Driver Store and Device Path...
dvi: {Build Driver List} 16:41:35.634
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'C:\Windows\inf'
dvi: {Build Driver List - exit(0x00000000)} 16:41:35.723
ndv: Selecting best match from Driver Store (including Device Path)...
dvi: {DIF_SELECTBESTCOMPATDRV} 16:41:35.724
dvi: No class installer for 'Unknown driver software package'
dvi: Default installer: Enter 16:41:35.725
dvi: {Select Best Driver}
! dvi: Selecting driver failed(0xe0000228)
dvi: {Select Best Driver - exit(0xe0000228)}
! dvi: Default installer: failed!
! dvi: Error 0xe0000228: There are no compatible drivers for this device.
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 16:41:35.728
ndv: {Core Device Install} 16:41:35.729
! ndv: Installing NULL driver!
dvi: Set selected driver complete.
dvi: {DIF_ALLOW_INSTALL} 16:41:35.754
dvi: No class installer for 'Unknown driver software package'
dvi: Default installer: Enter 16:41:35.755
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 16:41:35.756
dvi: {DIF_INSTALLDEVICE} 16:41:35.756
dvi: No class installer for 'Unknown driver software package'
dvi: Default installer: Enter 16:41:35.757
! dvi: Installing NULL driver!
dvi: Writing common driver property settings.
! dvi: Failed to set Device Description property: (null)
! dvi: Error 1784: The supplied user buffer is not valid for the requested operation.
dvi: {Restarting Devices} 16:41:35.771
dvi: Restart: NUSB3\ROOT_HUB30\5&174FC82C&2
dvi: {Restarting Devices exit} 16:41:35.775
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 16:41:35.776
ndv: Device install status=0xe0000203
ndv: Performing device install final cleanup...
! ndv: Queueing up error report since device installation failed...
ndv: {Core Device Install - exit(0xe0000203)} 16:41:35.777
ump: Server install process exited with code 0xe0000203 16:41:35.780
<<< Section end 2020/11/30 16:41:35.785MingoMongo
Well-known member
The iso was for a game, it's on recent files but that iso is deleted. I only got that driver software recently, I believe it updated some USB drivers and my ethernet. Ethernet I think it put to the wrong version but it was reinstalled earlier in this thread.
A lot of the listed drivers I was unaware of and had no use for anymore, or were not uninstalled properly (thought there was no trace of bazisvirtualcdbus when I looked earlier on Everything, sorry)
These I have kept:
xusb21.inf_amd64_b8916a1e19aec16a (oem17.inf) is my XBox wireless receiver
oemvista.inf_amd64_6f19c527a306dd1d (oem48.inf) is a part of Windscribe VPN
push2_display.inf_amd64_71951f00f0a6cd7d (oem32.inf) is a part of Ableton
I have no idea what those Bluetooth Peripheral Drivers are. When I was reinstalling my MOBOs bluetooth driver set, the devices (whatever they are) weren't given drivers and the Windows automatic search didn't find any for them. I don't see them on device manager now though after uninstalling the bluetooth drivers.
A lot of the listed drivers I was unaware of and had no use for anymore, or were not uninstalled properly (thought there was no trace of bazisvirtualcdbus when I looked earlier on Everything, sorry)
These I have kept:
xusb21.inf_amd64_b8916a1e19aec16a (oem17.inf) is my XBox wireless receiver
oemvista.inf_amd64_6f19c527a306dd1d (oem48.inf) is a part of Windscribe VPN
push2_display.inf_amd64_71951f00f0a6cd7d (oem32.inf) is a part of Ableton
I have no idea what those Bluetooth Peripheral Drivers are. When I was reinstalling my MOBOs bluetooth driver set, the devices (whatever they are) weren't given drivers and the Windows automatic search didn't find any for them. I don't see them on device manager now though after uninstalling the bluetooth drivers.
Attachments
You have got Start Menu\Programs\WinCDEmu
(bazisvirtualcdbus, WinCDEmu Virtual Bus Driver, c:\windows\system32\drivers\bazisvirtualcdbus.sys)
You could be able to remove it from here: Control Panel\Programs\Programs and Features - uninstall.
Open services.msc, set UMVPFSrv startup type to manual.
Reinstall webcam pro 9000, 2.51.828.0, 2010-06-10
(bazisvirtualcdbus, WinCDEmu Virtual Bus Driver, c:\windows\system32\drivers\bazisvirtualcdbus.sys)
You could be able to remove it from here: Control Panel\Programs\Programs and Features - uninstall.
Open services.msc, set UMVPFSrv startup type to manual.
Reinstall webcam pro 9000, 2.51.828.0, 2010-06-10
MingoMongo
Well-known member
I only had that start menu entry left, the rest of that app seems to be gone. UMVPFSrv set to manual. Webcam software reinstalled.
Then launch these commands:
Let me know if something won't work.
Code:
sc stop bazisvirtualcdbus
sc config bazisvirtualcdbus start= disabled
sc delete bazisvirtualcdbus
del c:\windows\system32\drivers\bazisvirtualcdbus.sysMingoMongo
Well-known member
First command said it's not been started (likely because I had it turned off for a clean boot)
disabled and deleted fine, .sys file couldn't be found because I've already deleted it.
Send fresh logs
MingoMongo
Well-known member
Which logs? Should I attempt another upgrade?
Has Sysnative Forums helped you? Please consider donating to help us support the site!