HDaudbus pops

[xilolee]

Yes, given that with everything updated you still get issues...

 

[shahinyp]

I really don't know what the problem is ... . the crack sound was gone after changing those things in previous posts. ( PSI setting, etc.)
But after the device updated and got back to Intel(R) Chipset SATA/PCIe RST Premium Controller again, everything has changed, and even when I've changed it back to Standard SATA AHCI Controller, didn't work.

 

[xilolee]

If you can reinstall (i.e., you have got their licenses and their installer) Cisco AnyConnect, speedvpn, and DVDFab Virtual Drive, whenever you want, try to uninstall them one by one.
I.e., uninstall Cisco AnyConnect and verify if the issue disappears.
If it does not, uninstall speedvpn and verify if the issue disappears.
If it does not, uninstall DVDFab Virtual Drive and verify if the issue disappears.

 

[shahinyp]

I uninstalled them all but still, the issue persists.

 

[xilolee]

Any news about ram and HDD tests?

 

[shahinyp]

Didn't do them yet, I'll do the tests now.

For the hard drive test, I must burn the iso file into a CD/DVD? or can I do this on a USB ?

 

[xilolee]

If you are using seatools for dos, a CD.
You can try alternatives: HDDScan or gsmartcontrol (as examples).
Check the same thread, fourth post.

 

[shahinyp]

I'm running the HDD test right now. I just want to mention that with audio enhancement off, the cracks are very low and almost disappear, but my sound quality drops down.
Do you know why the issue keeps back again and again? It has been gone after windows changing and also after that psi changing but came back again. Is it possible that it is a hardware problem?

Here is the HDD test output.

 

[xilolee]

Did you test the sk hynix ssd?

 

[shahinyp]

Not yet. I'll test that and send the result here and
For the ram test i just have that one option with usb, right ?

 

[xilolee]

There are four RAM test tutorials.
Open source Memtest86+ is outdated.
Preferred memtest tool is passmark memtest86.
But you can use also Windows memtest and hcidesign memtest.
Try two memtest tools of your choice.

 

[shahinyp]

Would you give me a link(the easiest one:)) for the ram test? and the smart supported status is 'No' for the SSD test, what should I do?

When I use hcidesign memtest, It says this:




And by the Windows memtest you mean windows memory diagnostic, right ?

 

[xilolee]

For the sk hynix ssd, you can try HDDScan.

Open four hcidesign instances: 3584 each one.
And one with 1500 (or less).

Windows memtest = windows memory diagnostic, yes.

 

[shahinyp]

Ok, thanks, and one other thing, I got these optional updates on my windows update setting, should I update them?

 

[xilolee]

Yes, try It.

 

[shahinyp]

I opened four hcidesign and it said could not allocate 3584 MB but the 1500 MB one did the testing. and the other thing when I updated those three drivers the IDE controller has changed to Intel 300 chipset series. should I change it back to standard sata? ( it made no difference to my crack issue ) and now I have two options for the Intel 300 series (the 12/20/2019 version and the 8/7/2019).

 

[xilolee]

Try with 5 with 3100
If the last one won't start, lower it: 3000, 2900, 2800...
It should scan the most RAM as possible.

 

[shahinyp]

should I stop the one which is running now then? and what about the IDE controller driver?

 

[xilolee]

Yes, stop the instance of hcidesign memtest and start five of them with 3100.
Leave the curent AHCI driver given that changing it with MS one didn't work.

 

[shahinyp]

Ok and one thing about HDDSCAN when I click on the tests button, there are four options. should I choose verify (read data without transfer) or read (read data to the host) ? and after that for the first sector, size and block size values should I leave them as default?