Scannow and dism not working (windows 10)

Hi

Please do the following.

Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.


Once FRST has completed please try windows updates again and post CBS.log if it fails.
 

Attachments

Hi

Please do the following.

Step#1 - Capture Process Monitor Trace
1. Download and run Process Monitor. Leave this running while you perform the next steps.
2. Try updating the system just like you have in the past.
3. Stop Process Monitor as soon as the it fails. You can simply do this by clicking the magnifying glass on the toolbar as shown below.

i3yiUac.png

4. Select the File menu...Save... and save the file to your desktop. This is likely the default location. The name (unless changed) will be LogFile.PML. This is fine.
5. Zip up and provide the link to the LogFile.PML file as well as your CBS.log Examples of services to upload to are Dropbox or OneDrive or SendSpace.
 
Hi

Please do the following.

Step1- SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put <> tags around the log to break up the text.
 

Attachments

Hi good afternoon here is the file

Code: 
SFCFix version 3.0.2.1 by niemiro.
Start time: 2021-12-03 21:02:38.567
Microsoft Windows 10 Build 19042 - amd64
Using .zip script file at C:\Users\anton.DESKTOP-64P88CC\Desktop\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\WINDOWS\winsxs\manifests

Successfully copied file C:\Users\anton.DESKTOP-64P88CC\AppData\Local\niemiro\Archive\manifests\amd64_microsoft-windows-t..enseserver-tlsbrand_31bf3856ad364e35_10.0.19041.1_none_0485258622f640f5.manifest to C:\WINDOWS\winsxs\manifests\amd64_microsoft-windows-t..enseserver-tlsbrand_31bf3856ad364e35_10.0.19041.1_none_0485258622f640f5.manifest.

Successfully restored ownership for C:\WINDOWS\winsxs\manifests
Successfully restored permissions on C:\WINDOWS\winsxs\manifests
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 1043 datablocks.
Finish time: 2021-12-03 21:04:56.083
Script hash: xm43aWjJW5LDF1cnuQdjQ6CnEYAm5rFCWpHFEPLnsuY=
----------------------EOF-----------------------
 

Attachments

Hi

Please do the following.

Step#1 - FRST Fix

NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.


Once FRST has completed, reboot and please try windows updates again and post CBS.log if it fails.
 

Attachments

Hi

Please do the following.

Step#1 - Capture Process Monitor Trace

1. Download and run Process Monitor. Leave this running while you perform the next steps.
2. Try updating the system just like you have in the past.
3. Stop Process Monitor as soon as the it fails. You can simply do this by clicking the magnifying glass on the toolbar as shown below.


i3yiUac.png


4. Select the File menu...Save... and save the file to your desktop. This is likely the default location. The name (unless changed) will be LogFile.PML. This is fine.
5. Zip up and provide the link to the LogFile.PML file as well as your CBS.log Examples of services to upload to are Dropbox or OneDrive or SendSpace.
 
Hello

My apologies for the delay here, I am extremely busy at the moment and I will post my next fix for you soon.
 
Hi, good evening Bruce, don't worry, I can wait. I appreciate your help with my problem and I can wait as long as it takes for it to be solved, :) and I hope you have a great time at Christmas that there are few days left until Christmas is!
 
Hi

Please do the following.

Step1- SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put <> tags around the log to break up the text.
then try windows update and attach the CBS.log if it fails.
 

Attachments

hello good evening here are the files

cbs (1).zip

Code: 
SFCFix version 3.0.2.1 by niemiro.
Start time: 2021-12-21 18:46:37.214
Microsoft Windows 10 Build 19042 - amd64
Using .zip script file at C:\Users\anton.DESKTOP-64P88CC\Desktop\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\WINDOWS\winsxs\manifests

Successfully copied file C:\Users\anton.DESKTOP-64P88CC\AppData\Local\niemiro\Archive\manifests\amd64_microsoft-windows-t..sappsrv-tsvipevents_31bf3856ad364e35_10.0.19041.1_none_35a872e62ee8fe3b.manifest to C:\WINDOWS\winsxs\manifests\amd64_microsoft-windows-t..sappsrv-tsvipevents_31bf3856ad364e35_10.0.19041.1_none_35a872e62ee8fe3b.manifest.

Successfully restored ownership for C:\WINDOWS\winsxs\manifests
Successfully restored permissions on C:\WINDOWS\winsxs\manifests
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 1043 datablocks.
Finish time: 2021-12-21 18:49:46.640
Script hash: cFeT8wDW19sCOjDZuCdIb0GDCtwzLHH3uL5ye1DjrkU=
----------------------EOF-----------------------
 
Hi

Please do the following.

Step#1 - Capture Process Monitor Trace

1. Download and run Process Monitor. Leave this running while you perform the next steps.
2. Try updating the system just like you have in the past.
3. Stop Process Monitor as soon as the it fails. You can simply do this by clicking the magnifying glass on the toolbar as shown below.



i3yiUac.png



4. Select the File menu...Save... and save the file to your desktop. This is likely the default location. The name (unless changed) will be LogFile.PML. This is fine.
5. Zip up and provide the link to the LogFile.PML file as well as your CBS.log Examples of services to upload to are Dropbox or OneDrive or SendSpace.
 
Hi

Please do the following.

Step1- SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put <> tags around the log to break up the text.
Step#2 - Capture Process Monitor Trace

1. Download and run Process Monitor. Leave this running while you perform the next steps.
2. Try updating the system just like you have in the past.
3. Stop Process Monitor as soon as the it fails. You can simply do this by clicking the magnifying glass on the toolbar as shown below.




i3yiUac.png




4. Select the File menu...Save... and save the file to your desktop. This is likely the default location. The name (unless changed) will be LogFile.PML. This is fine.
5. Zip up and provide the link to the LogFile.PML file as well as your CBS.log Examples of services to upload to are Dropbox or OneDrive or SendSpace.
 

Attachments

You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top