[SOLVED] Windows 10 Error 0x800f0831 While Installing KB4517211

[brinox]

KB4517389

 

[Sysnative Windows Update]

Please try KB4522355

 

[brinox]

I'm getting error 0x800736b3 while installing KB4522355, too. Logs attached and uploaded.

 

[Sysnative Windows Update]

Back to this process again: Windows 10 Error 0x800f0831 While Installing KB4517211

 

[brinox]

Done, another error 0x800736b3, logs attached and uploaded.

 

[Sysnative Windows Update]

Please run DISM.

 

[brinox]

The dism restore completed successfully. After that, I tried Windows Update again, yielding another 0x800736b3 error. Logs attached and uploaded.

 

[Sysnative Windows Update]

Put the folders into the KB4522355.cab and retry installing it with DISM.

 

[brinox]

The update process took a little longer now, but I'm still stuck with error 0x800736b3. Logs attached and uploaded.

 

[Sysnative Windows Update]

Next.

 

[brinox]

Another error 0x800736b3, logs attached and uploaded.

 

[Sysnative Windows Update]

Extract the manifests into the KB4522355.cab located in C:\Windows\CBSTemp dir and retry updating.

Thank you for your patience with the issue.

 

[brinox]

Thank you for your patience with the issue.

Thanks for your patience!

The update process took somewhat longer again but failed with error 0x800736b3. Logs attached and uploaded.

 

[Sysnative Windows Update]

Thanks.

 

[brinox]

And next error 0x800736b3, logs attached and uploaded.

 

[Sysnative Windows Update]

Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.



Step#2 - DISM /RestoreHealth Scan
Warning:this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Right-click on the Start button and select Command Prompt (Admin)
2. When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
   Dism /Online /Cleanup-Image /RestoreHealth
3. Once it finishes, copy and paste the following into the command-prompt window and press Enter. If prompted to overwrite the existing file go ahead.
   copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
   
4. Once this has completed please go to your Desktop and you will find CBS.txt => Please zip/upload to this thread.
   Please Note:: if the file is too big (over 7MB) to upload to your next post, please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.

 

[brinox]

Dism failed with error 0x800f081f: source files not found.

 

[Sysnative Windows Update]

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
3. Save any open documents and close all open windows.
4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
6. SFCFix will now process the script.
7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

Afterwards, run DISM/RestoreHealth.

 

[brinox]

Dism fails with error 2: file not found.

 

[Sysnative Windows Update]

Please run this fix and then DISM just to see if my thinking is right. The good news is, we are making progress.