[SOLVED] Windows 7 32 system restore not working sfc and Sur ok

Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.

Step 2:
  • Run the tool
    61f7aba7309a1-ComponentsScanner_Icon.png
    ComponentsScanner again.
  • Once complete, a report will be saved to your desktop called ComponentsScanner.txt.
  • Attach that file to your next reply.
 

Attachments

Provide the Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to Gofile or WeTransfer and just provide the link here.

Option#2 (only if you are unable to follow the previous instructions)

  • Please download the Freeware RegBak from here: Acelogix Software - Download products
     You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
  • Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
  • Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Gofile or WeTransfer and then just provide the link in your reply.
  • You can close any open windows you have as well as the RegBak program now.
 
Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.

Step 2:
  • Run the tool
    61f7aba7309a1-ComponentsScanner_Icon.png
    ComponentsScanner again.
  • Once complete, a report will be saved to your desktop called ComponentsScanner.txt.
  • Attach that file to your next reply.
 

Attachments

WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download
    myjIXnC.png
    SFCFix and move the executable to your desktop.
  • Download the attachment SFCFixScript.txt and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFixScript.txt file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.
 

Attachments

Check system restore again and report the result.
 
Turned on system restore and asked to create a restore point , you can see hard drive working for 5 minute but no restore point created. .After 20 minutes I hit cancel went back to system protection and all details were greyed out .Only way to get it to display was to restart computer.
 
Hi, sorted out the problem with Avast , used Avastclear and reinstalled ran ComponentsScanner , rechecked system restore still will not store a restore point just shows its running for 20 minutes or more.
 

Attachments

Provide a screenshot of the system restore settings.

Step 1:
Is "EaseUS Todo Backup" installed ?

Step 2:
Open an elevated command prompt.
Copy and paste the following commands into it, press enter after each.

Code: 
sfc /scannow
Wait for this to finish before you continue

Code: 
copy %windir%\Logs\CBS\cbs.log "%userprofile%\Desktop\cbs.txt"
This will create a file, cbs.txt on your Desktop. Zip this file and attach the zipped cbs.txt to your next post.
 
Hi, yes we have easeus todo backup installed to save a backup once a month as system restore was not working
Find attached system restore settings, if you click on create a box appears with a green running line , hard drive runs but will not create a restore point and cbs.txt
 

Attachments

  • desktop2.jpg
    desktop2.jpg
    112.8 KB · Views: 4
  • cbs.txt
    cbs.txt
    2.7 MB · Views: 2
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.
 

Attachments

Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.
 

Attachments

In the screenshot in message #33, click the button Delete to remove all restore points.
Restart the machine.
Try to create a restore point and report the result. Let it run at least 1 hour.
 
Tried to create a restore point for one hour still failed image attached to show error message
 

Attachments

  • Restore fail.jpg
    Restore fail.jpg
    208.6 KB · Views: 2
Export Services:
1. Click the Start button and then type cmd in the search box. Right-click on cmd that comes up in the search results and select Run as administrator.
2. A User Account Control dialog may come up asking for approval. If it does go ahead and allow.
3. A command prompt window will open. Copy and paste the following into the command-prompt and hit enter.
wmic service get name,displayname,pathname,startmode,exitcode > "%USERPROFILE%\desktop\services.txt"
4. After the command runs there will be a file on your desktop named services.txt.
5. Attach this file to your next reply.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top