[SOLVED] Windows 7 Home not updating

Looking good.
Provide a fresh copy of your SOFTWARE hive.

Retrieve Software Hive
1. Navigate to C:\Windows\System32\Config and locate the SOFTWARE file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named SOFTWARE.ZIP on your desktop.
4. Upload the zip file (SOFTWARE.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are FileDropper or One Drive or SendSpace.
5. Note:Send the downloadlink in a private message as the SOFTWARE hive contains sensitive information!

Option#2 (only if you are unable to follow the previous instructions)

  • Please download the Freeware RegBak from here: Acelogix Software - Download products
     You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named SOFTWARE.
  • Copy the SOFTWARE file to your Desktop. If the SOFTWARE file does not exist, please fetch it instead from C:\Windows\System32\config\SOFTWARE.
  • Now right-click on the SOFTWARE file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (SOFTWARE.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are FileDropper or One Drive or SendSpace.
  • Note:Send the downloadlink in a private message as the SOFTWARE hive contains sensitive information!
  • You can close any open windows you have as well as the RegBak program now.
 
Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt. Please be patience.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Post the logfile Fixlog.txt as attachment in your next reply.

Step 2:
Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log in your next reply.
 

Attachments

Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt. Please be patience.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Post the logfile Fixlog.txt as attachment in your next reply.

Step 2: Remove Update Manually
  1. Click on the Start button and in the search box, type Command Prompt.
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator.
  3. When command prompt opens, copy and paste the following command into it, then press enter.
    wusa /uninstall /KB:3022345
  4. Let me know if it says it was successful or if there are any errors.

Step 3:
Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log in your next reply.
 

Attachments

As to step 2, at the end of the exercise the message was: "KB3022345 is not installed on this computer". I cut and pasted the command as you suggested so I am sure that it was directed to search for the indicated update.
 

Attachments

Please do following:

FRST Registry Search
  1. Click your Start button and choose Control Panel.
  2. In the upper right corner ensure the View by: is set to Category.
  3. Select the Programs group.
  4. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog.
    Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open.
  5. Right-click on the file FRST64.exe and choose Run as administrator.
  6. Copy and paste KB3022345 into the Search box and click the Search Registry button.
  7. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
  8. You may close any remaining open windows now.
 
Provide a fresh copy of your SOFTWARE hive.

Retrieve Software Hive
1. Navigate to C:\Windows\System32\Config and locate the SOFTWARE file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named SOFTWARE.ZIP on your desktop.
4. Upload the zip file (SOFTWARE.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are FileDropper or One Drive or SendSpace.
5. Note:Send the downloadlink in a private message as the SOFTWARE hive contains sensitive information!

Option#2 (only if you are unable to follow the previous instructions)

  • Please download the Freeware RegBak from here: Acelogix Software - Download products
     You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named SOFTWARE.
  • Copy the SOFTWARE file to your Desktop. If the SOFTWARE file does not exist, please fetch it instead from C:\Windows\System32\config\SOFTWARE.
  • Now right-click on the SOFTWARE file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (SOFTWARE.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are FileDropper or One Drive or SendSpace.
  • Note:Send the downloadlink in a private message as the SOFTWARE hive contains sensitive information!
  • You can close any open windows you have as well as the RegBak program now.
 
Step 1:

SOFTWARE Hive Replacement with RegBak
Warning: This fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good.

  1. Close all open programs and save all your work. You will need to reboot the machine during this process.
  2. Download the SOFTWARE.ZIP from the private message I sent you.
  3. Right-click on SOFTWARE.ZIP and select Extract All.... Ensure the "Show extracted files when complete" checkbox is checked and click the Extract button.
  4. The software hive will be extracted. You will see the file named SOFTWARE (no extension)
  5. Copy the SOFTWARE hive to where you previously saved a backup. It should be (C:\Windows\RegBak\PC-NAME\DATE\Windows\System32\Config)
  6. 2014-10-1818_56_49-config_zpscbb8aad0.png
  7. Overwrite the one that is currently there when prompted.
  8. Open RegBak by click Start and selecting Registry Backup and Restore. Highlight the backup in the list (it should be the one date today), and press Restore. Click Start. RegBak will reboot your computer to complete the restore process.
Let me know if the hive was replaced or if there were any errors.

Step 2:
Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log in your next reply.
 
No, that was just a layout problem that caused the screenshot to become number 6. It should have been part of number 5.
It is fixed in the instructions below. Thanks for your feedback on this.

Step 1:

SOFTWARE Hive Replacement with RegBak
Warning: This fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good.

  1. Close all open programs and save all your work. You will need to reboot the machine during this process.
  2. Download the SOFTWARE.ZIP from the private message I sent you.
  3. Right-click on SOFTWARE.ZIP and select Extract All.... Ensure the "Show extracted files when complete" checkbox is checked and click the Extract button.
  4. The software hive will be extracted. You will see the file named SOFTWARE (no extension)
  5. Copy the SOFTWARE hive to where you previously saved a backup. It should be (C:\Windows\RegBak\PC-NAME\DATE\Windows\System32\Config)
    2014-10-1818_56_49-config_zpscbb8aad0.png
  6. Overwrite the one that is currently there when prompted.
  7. Open RegBak by click Start and selecting Registry Backup and Restore. Highlight the backup in the list (it should be the one date today), and press Restore. Click Start. RegBak will reboot your computer to complete the restore process.
Let me know if the hive was replaced or if there were any errors.

Step 2:
Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log in your next reply.
 
Referring to Item 93, are you saying that I now can proceed with installation of all outstanding Downloads, or is there more that must be done.

Michael
 
There are some remaining issues. Check Windows Update now and install the ones that are available. Please report the result.
 
The only updates (8 out of 59) that installed were some of the security update and the malicious software removal tool.

I am unable to get a screen print of the update history.

MK
 
Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt. Please be patience.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Post the logfile Fixlog.txt as attachment in your next reply.

Step 2:
Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log in your next reply.
 

Attachments

Provide a fresh copy of your SOFTWARE hive.

Retrieve Software Hive
1. Navigate to C:\Windows\System32\Config and locate the SOFTWARE file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named SOFTWARE.ZIP on your desktop.
4. Upload the zip file (SOFTWARE.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are FileDropper or One Drive or SendSpace.
5. Note:Send the downloadlink in a private message as the SOFTWARE hive contains sensitive information!

Option#2 (only if you are unable to follow the previous instructions)

  • Please download the Freeware RegBak from here: Acelogix Software - Download products
     You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named SOFTWARE.
  • Copy the SOFTWARE file to your Desktop. If the SOFTWARE file does not exist, please fetch it instead from C:\Windows\System32\config\SOFTWARE.
  • Now right-click on the SOFTWARE file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (SOFTWARE.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are FileDropper or One Drive or SendSpace.
  • Note:Send the downloadlink in a private message as the SOFTWARE hive contains sensitive information!
  • You can close any open windows you have as well as the RegBak program now.
 
Step 1:
SOFTWARE Hive Replacement with RegBak
Warning: This fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good.

  1. Close all open programs and save all your work. You will need to reboot the machine during this process.
  2. Download the SOFTWARE.ZIP from the private message I sent you.
  3. Right-click on SOFTWARE.ZIP and select Extract All.... Ensure the "Show extracted files when complete" checkbox is checked and click the Extract button.
  4. The software hive will be extracted. You will see the file named SOFTWARE (no extension)
  5. Copy the SOFTWARE hive to where you previously saved a backup. It should be (C:\Windows\RegBak\PC-NAME\DATE\Windows\System32\Config)
    2014-10-1818_56_49-config_zpscbb8aad0.png
  6. Overwrite the one that is currently there when prompted.
  7. Open RegBak by click Start and selecting Registry Backup and Restore. Highlight the backup in the list (it should be the one date today), and press Restore. Click Start. RegBak will reboot your computer to complete the restore process.
Let me know if the hive was replaced or if there were any errors.

Step 2:
Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log in your next reply.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top