Windows Update error 80070002 (Windows 7)

Alright, if you try to uninstall it again, does it says that the update isn't installed, or does it actually goes through with the uninstall?
 
Alright uninstall it, restart and try to install the SP1 again.

By the way, did you think about the Repair Install solution?
 
Yes, I just haven't had a chance to go check the place where they would be, and I'm not sure when I'll be able to.
 
A Repair Install should take less than an hour. So you could even launch it overnight (or before going to bed) and make it check for the updates then to not lose time.
 
No you need once, hence why I asked. You can do it using a .iso however, but you have to download it from the Microsoft Software Recovery Center using a retail product key for your Windows 7 edition.
 
OEM I believe. I just used produkey and have the key. Can you point me to the .iso?
 
I doubt that some files were damaged in the short time you were out but we'll run SURT just in case.

Windows Update error 0x8007000d - Windows Help

IGJdB0T.png
System Update Readiness Tool (SURT) - Scan
Follow the instructions below to run a scan with the System Update Readiness Tool (SURT) and provide a log;
  • Download the right version of SURT for your system;
    • Your version of Windows is:
  • Once downloaded, execute the installer, and go throught the installation (this process can take around 15-20 minutes);
  • On completion, a log will be created in C:\Windows\Logs\CBS\CheckSUR.log;
  • Attach this log in your next reply;
Alternatively, if these instructions are unclear for you, you can follow the tutorial below.

System Update Readiness Tool (SURT)
 
Well would you look at that.
Code: 
(f)	CSI Payload File Missing	0x00000000	netr28ux.inf	amd64_netr28ux.inf_31bf3856ad364e35_6.1.7600.16385_none_9e04f5ea3d7bf9e0	
(f)	CSI Payload File Missing	0x00000000	netr28ux.sys	amd64_netr28ux.inf_31bf3856ad364e35_6.1.7600.16385_none_9e04f5ea3d7bf9e0
Follow the instructions below please.

myjIXnC.png
SFCFix - Fix Time

WARNING! The following fix is specific to the user's system in this thread. No one else should follow the instructions below to apply that fix, as it could damage your system. If you need assistance with an issue, please start a new thread and someone will assist you shortly.

Follow the instructions below to download and execute a SFCFix fix, and provide the log.
  • Download SFCFix and move the executable on your Desktop;
  • Download the attached SFCFix.zip and move the archive to your Desktop;
    Note: Make sure that the file is named SFCFix.zip, do not rename it.
  • Save any work you have open, and close every programs;
  • Drag the SFCFix.zip archive file over the SFCFix.exe executable and release it;
    mMabJGT.gif
  • SFCFix will launch, let it complete;
  • Once done, a file will appear on your Desktop, called SFCFix.txt;
  • Open the file, then copy and paste its content in your next reply;
SFCFix.zip
 
SFCFix version 2.4.5.0 by niemiro.
Start time: 2015-11-09 17:57:35.712
Microsoft Windows 7 - amd64
Using .zip script file at C:\Users\Dillon\Desktop\SFCFix (4).zip [0]








PowerCopy::
Successfully took permissions for file or folder C:\Windows\winsxs\amd64_netr28ux.inf_31bf3856ad364e35_6.1.7600.16385_none_9e04f5ea3d7bf9e0


Successfully copied file C:\Users\Dillon\AppData\Local\niemiro\Archive\winsxs\amd64_netr28ux.inf_31bf3856ad364e35_6.1.7600.16385_none_9e04f5ea3d7bf9e0\netr28ux.inf to C:\Windows\winsxs\amd64_netr28ux.inf_31bf3856ad364e35_6.1.7600.16385_none_9e04f5ea3d7bf9e0\netr28ux.inf.
Successfully copied file C:\Users\Dillon\AppData\Local\niemiro\Archive\winsxs\amd64_netr28ux.inf_31bf3856ad364e35_6.1.7600.16385_none_9e04f5ea3d7bf9e0\netr28ux.sys to C:\Windows\winsxs\amd64_netr28ux.inf_31bf3856ad364e35_6.1.7600.16385_none_9e04f5ea3d7bf9e0\netr28ux.sys.


Successfully restored ownership for C:\Windows\winsxs\amd64_netr28ux.inf_31bf3856ad364e35_6.1.7600.16385_none_9e04f5ea3d7bf9e0
Successfully restored permissions on C:\Windows\winsxs\amd64_netr28ux.inf_31bf3856ad364e35_6.1.7600.16385_none_9e04f5ea3d7bf9e0
PowerCopy:: directive completed successfully.








Successfully processed all directives.
SFCFix version 2.4.5.0 by niemiro has completed.
Currently storing 12 datablocks.
Finish time: 2015-11-09 17:57:36.882
Script hash: B8owfVelebiqckMApeCQTtCnXcQhrBl/du8Aflo16QU=
----------------------EOF-----------------------
 
Let's run a SFC scan to see if the changes are accepted.

EndqYRa.png
System File Checker (SFC)
Follow the instructions below to run a SFC scan on your system and to provide the CBS log in your next reply;
  • On Windows Vista & 7, click on the Windows Start Menu, then enter cmd in the search box, right-click on the cmd icon and select
    Spcusrh.png
    Run as Administrator
  • On Windows 8, drag your cursor in the bottom-left corner, and right-click on the metro menu preview, then select Command Prompt (Admin);
  • On Windows 8.1, right click on the Windows logo in the bottom-left corner and select Command Prompt (Admin);
  • Enter the command below and press on Enter;
    Code: 
    sfc /scannow
    Note: There's a space between "sfc" and "/scannow";
  • Once the scan is complete, enter the command below and press on Enter
    Code: 
    copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  • A file called cbs.txt will have appeared on your Desktop. Upload the file on Dropbox, Google Drive or OneDrive and post the download URL for it here;
Note: Please note that the CBS.log is volatile, which means that if you don't upload it after the SFC scan is completed, it won't have the information from the scan anymore. So archive it and upload it as soon as you can.
 
Alright the replacements were accepted. Try to install the SP1 again and if it fails, upload the two logs for me once more please (WindowsUpdate.log, CBS.log).
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top