[SOLVED] [Win10v1511Build10586Ent x64] 0x8024200D error trying to install v1607

Screenshot 5, 6, 7
Service registration is missing or corrupt
 

Attachments

  • screenshot7.png
    screenshot7.png
    45 KB · Views: 4
  • screenshot6.png
    screenshot6.png
    50.6 KB · Views: 3
  • screenshot5.png
    screenshot5.png
    58.9 KB · Views: 2
Thanks. Just a reminder to do the following if you haven't.
Also, please delete the entire C:\FRST folder and then empty your recycle bin.
Click to expand...

Next, please do the following.

Step#1 - Run Windows Repairs
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
1. Download Windows Repair (All-in-One) Portable to your desktop.
2. Once the file is downloaded, right-click on the file on your desktop and choose Extract All...
Extract.JPG

3. Keep the defaults and click the Extract button.
4. A folder named tweaking.com_windows_repair_aio will be extracted to the desktop. Once the extraction is complete the folder will open.
5. Inside this folder, there is a folder named Tweaking.com - Windows Repair. Open this folder as well.
Capture.JPG



6. Double-click on Repair_Windows.exe to open. Note: Please make sure all of your programs are closed and anything you were working on is saved as we will be rebooting.
7. When the program opens, click the Reboot to Safe Mode button at the bottom of the screen. Answer Yes to allow.
8. Once rebooted into Safe Mode, open the program again. When the program opens, click the Repairs tab and click the Open Repairs button.
9. A backup of your registry will be made. After a few moments you will have many options from which you can choose.
10. Please click the Unselect All button and then click to enable only the following ones:

14 - Remove Temp Files
17 - Repair Windows Updates


11. Ensure the Restart check box is selected and click the Start Repairs button in the lower right of the screen. This may take some time to run so be patient.
StartRepairsWithReboot.JPG

12. Once the fixes are complete you will be prompted to restart your machine. Answer Yes.
 
Ok. I see I need to reboot in safe mode. Because I'm far from PC and I'm using TeamViewer to connect, I can't do it before 2nd of May, when I will be phisically in front of PC.
If you know other ways to connect remotely to PC in safe mode, please tell me.
I can't stop to say you thanks for your time and patience.
 
We can accomplish this differently since you are remote. Please do the following.

FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Download attached file and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
2. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
3. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
4. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
 

Attachments

Fix result of Farbar Recovery Scan Tool (x64) Version: 27-04-2017
Ran by Loredana (29-04-2017 17:50:26) Run:1
Running from C:\Users\Loredana\Desktop
Loaded Profiles: Loredana (Available Profiles: Ripartiz Informatica & Loredana)
Boot Mode: Normal
==============================================


fixlist content:
*****************
cmd: net stop wuauserv
cmd: net stop bits
cmd: rename c:\windows\SoftwareDistribution SoftwareDistribution.bak
cmd: net start wuauserv
cmd: net start bits
cmd: reg query "HKLM\SOFTWARE\Microsoft\WIMMount\Mounted Images" /s


*****************




========= net stop wuauserv =========


Il servizio Windows Update sta per essere arrestato......................................
Impossibile arrestare il servizio Windows Update.




========= End of CMD: =========




========= net stop bits =========


Servizio Servizio trasferimento intelligente in background non avviato.


Ulteriori informazioni sono disponibili digitando NET HELPMSG 3521.




========= End of CMD: =========




========= rename c:\windows\SoftwareDistribution SoftwareDistribution.bak =========


Accesso negato.


========= End of CMD: =========




========= net start wuauserv =========


Il servizio sta per essere avviato o arrestato. Riprovare in seguito.




========= End of CMD: =========




========= net start bits =========


Servizio Servizio trasferimento intelligente in background in fase di avvio .
Avvio del servizio Servizio trasferimento intelligente in background riuscito.




========= End of CMD: =========




========= reg query "HKLM\SOFTWARE\Microsoft\WIMMount\Mounted Images" /s =========




HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WIMMount\Mounted Images\07e4ee9b-2a94-462b-a09b-9fda3f51373b
Mount Version REG_DWORD 0x10001
Image time high REG_DWORD 0x1d24376
Image time low REG_DWORD 0x51f66c59
Status REG_DWORD 0x2
Mount Path REG_SZ C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount
WIM Path REG_SZ C:\$WINDOWS.~BT\Sources\SafeOS\winre.wim
Image Index REG_DWORD 0x1
FileCount REG_DWORD 0x4303
Mount path high REG_DWORD 0xd0000
Mount path low REG_DWORD 0x20a4




========= End of CMD: =========




==== End of Fixlog 17:52:04 ====
 
Thanks. Please do the following.

FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Download attached file and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
2. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
3. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
4. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
 

Attachments

Fix result of Farbar Recovery Scan Tool (x64) Version: 27-04-2017
Ran by Loredana (29-04-2017 18:24:52) Run:2
Running from C:\Users\Loredana\Desktop
Loaded Profiles: Loredana (Available Profiles: Ripartiz Informatica & Loredana)
Boot Mode: Normal
==============================================


fixlist content:
*****************
cmd: sc config wuauserv start= disabled
[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WIMMount\Mounted Images\07e4ee9b-2a94-462b-a09b-9fda3f51373b]
Reboot:
cmd: rename c:\windows\SoftwareDistribution SoftwareDistribution.bak




*****************




========= sc config wuauserv start= disabled =========


[SC] ChangeServiceConfig OPERAZIONI RIUSCITE


========= End of CMD: =========


HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WIMMount\Mounted Images\07e4ee9b-2a94-462b-a09b-9fda3f51373b => key removed successfully


========= rename c:\windows\SoftwareDistribution SoftwareDistribution.bak =========


Accesso negato.


========= End of CMD: =========






The system needed a reboot.


==== End of Fixlog 18:24:52 ====
 
Thanks. Please do the following.

FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Download attached file and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
2. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
3. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
4. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
 

Attachments

Fix result of Farbar Recovery Scan Tool (x64) Version: 27-04-2017
Ran by Loredana (29-04-2017 18:39:34) Run:3
Running from C:\Users\Loredana\Desktop
Loaded Profiles: Loredana (Available Profiles: Ripartiz Informatica & Loredana)
Boot Mode: Normal
==============================================


fixlist content:
*****************
cmd: net stop bits
cmd: rename c:\windows\SoftwareDistribution SoftwareDistribution.bak
cmd: net start bits


*****************




========= net stop bits =========


Servizio Servizio trasferimento intelligente in background non avviato.


Ulteriori informazioni sono disponibili digitando NET HELPMSG 3521.




========= End of CMD: =========




========= rename c:\windows\SoftwareDistribution SoftwareDistribution.bak =========




========= End of CMD: =========




========= net start bits =========


Servizio Servizio trasferimento intelligente in background in fase di avvio .
Avvio del servizio Servizio trasferimento intelligente in background riuscito.




========= End of CMD: =========




==== End of Fixlog 18:39:37 ====
 
Thanks. Please do the following.

FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Download attached file and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
2. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
3. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
4. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
 

Attachments

Fix result of Farbar Recovery Scan Tool (x64) Version: 27-04-2017
Ran by Loredana (29-04-2017 18:46:20) Run:4
Running from C:\Users\Loredana\Desktop
Loaded Profiles: Loredana (Available Profiles: Ripartiz Informatica & Loredana)
Boot Mode: Normal
==============================================


fixlist content:
*****************
cmd: sc config wuauserv start= enabled
Reboot:






*****************




========= sc config wuauserv start= enabled =========




ERRORE: campo start= non valido


DESCRIZIONE:
Modifica una voce di servizio nel Registro di sistema e nel database
del servizio.
SINTASSI:
sc <server> config [nome servizio] <opzione1> <opzione2>...


OPZIONI:
NOTA: il nome dell'opzione include il segno di uguale.
Ô necessario inserire uno spazio tra il segno di uguale e il valore.
type= <own|share|interact|kernel|filesys|rec|adapt|userown|usershare>
start= <boot|system|auto|demand|disabled|delayed-auto>
error= <normal|severe|critical|ignore>
binPath= <NomePercorsoBinario del file EXE>
group= <GruppoOrdineCaricamento>
tag= <yes|no>
depend= <Dipendenze (separate da / (barra))>
obj= <NomeAccount|NomeOggetto>
DisplayName= <nome visualizzato>
password= <password>


========= End of CMD: =========






The system needed a reboot.


==== End of Fixlog 18:46:20 ====
 
Thanks. Please do the following.

FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Download attached file and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
2. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
3. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
4. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
 

Attachments

Fix result of Farbar Recovery Scan Tool (x64) Version: 27-04-2017
Ran by Loredana (29-04-2017 19:05:40) Run:5
Running from C:\Users\Loredana\Desktop
Loaded Profiles: Loredana (Available Profiles: Ripartiz Informatica & Loredana)
Boot Mode: Normal
==============================================


fixlist content:
*****************
cmd: sc config wuauserv start= demand




*****************




========= sc config wuauserv start= demand =========


[SC] ChangeServiceConfig OPERAZIONI RIUSCITE


========= End of CMD: =========




==== End of Fixlog 19:05:40 ====
 
-Windows Defender
-1607 update
 

Attachments

  • screenshot9.png
    screenshot9.png
    55.9 KB · Views: 3
  • screenshot8.png
    screenshot8.png
    57.2 KB · Views: 4
Unfortunatly I obtained again:
"Errore di installazione. Non è stato possibile installare il seguente aggiornamento, errore 0x8024200D: Aggiornamento delle funzionalità a Windows 10 Enterprise, versione 1607."
 
Hit CTRL-ALT-DEL on your keyboard.
Then click Task Manager.
Click the Startup Tab
Provide a screen shot of this in your next post.

For example, mine looks like the following.

Capture.JPG
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top