[SOLVED] [Win7Pro x64] Corrupt update files - Can't install SP1

Re: [Win7Professional] Corrupt update files - Can't install SP1

Here are the cbs log and sfcfix.txt files
 

Attachments

Re: [Win7Professional] Corrupt update files - Can't install SP1

Now, please do the following.

Step#1 - System Update Readiness Tool (SUR)
1. Download and run the following file.
2. When it asks you if you wish to install, please answer yes. Note: It could take 15 minutes or more to run. Please don't cancel.
3. You will get an Installation Complete screen when it's done running.
4. Please attach the log from the following location. C:\Windows\Logs\CBS\CheckSUR.log
Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.
 
Re: [Win7Pro] Corrupt update files - Can't install SP1

Please do the following.

Step#1 - SFCFix Script
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download SFCFix.exe (by niemiro) and save this to your Desktop. If you still have this on your desktop from downloading previously, you don't need to re-download.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please

Step#2 - System Update Readiness Tool (SUR)
 1. Download and run the following file.
2. When it asks you if you wish to install, please answer yes. Note: It could take 15 minutes or more to run. Please don't cancel.
3. You will get an Installation Complete screen when it's done running.
4. Please attach the log from the following location. C:\Windows\Logs\CBS\CheckSUR.log
Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.
 

Attachments

Re: [Win7Pro] Corrupt update files - Can't install SP1

Please do the following.

Step#1 - SFCFix Script
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop. If you still have this on your desktop from downloading previously, you don't need to re-download.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please


Step#2 - System Update Readiness Tool (SUR)
 1. Download and run the following file.
2. When it asks you if you wish to install, please answer yes. Note: It could take 15 minutes or more to run. Please don't cancel.
3. You will get an Installation Complete screen when it's done running.
4. Please attach the log from the following location. C:\Windows\Logs\CBS\CheckSUR.log
Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.
 

Attachments

Re: [Win7Pro] Corrupt update files - Can't install SP1

Excellent. Please do the following.

Retrieve Components Hive
 1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to SendSpace and just provide the link here.
 
Re: [Win7Pro] Corrupt update files - Can't install SP1

This must be the longest you've ever spent on an issue
Click to expand...
Actually, not even close. :smile9:

OK, please attempt the SP1 install again. Make note of any errors. Let me know how it goes.
 
Re: [Win7Pro] Corrupt update files - Can't install SP1

Furthest it's ever gotten, finished first stage of install, rebooted, began configuring service pack but right at the end it said "Failure to configure service pack, reverting changes" and after another 2 reboots its reverted. Install Windows Service Pack dialog shows Error 0x800400a. Here is the cbs log: Download CBS.zip from Sendspace.com - send big files the easy way
 
Re: [Win7Pro] Corrupt update files - Can't install SP1

Good. Progress I guess. I see the issue.

Code: 
2017-04-08 16:17:37, Error                 CSI    00000013@2017/4/8:22:17:37.996 (F) CMIADAPTER: Inner Error Message from AI HRESULT = 8004400a [Error,Facility=FACILITY_ITF,Code=16394 (0x400a)]
 [
[151]"Parsing MOF file: C:\Windows\system32\wbem\onex.mof
C:\Windows\system32\wbem\onex.mof (1): error SYNTAX 0X8004400a: Unexpected token at file scope

Can you please zip and attach the c:\windows\inf\setupapi.dev.log as well?
 
Re: [Win7Pro] Corrupt update files - Can't install SP1

Yes real progress now. What was the difference this time? I think when I first posted I had resolved almost all the checksur issues, was there something I missed before?

Here is the log
 

Attachments

Re: [Win7Pro] Corrupt update files - Can't install SP1

There were a lot of missing/corrupt files that we still had to replace. SFC found a bunch more that SURT didn't. Please do the following.

FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download attached file and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
 

Attachments

Re: [Win7Pro] Corrupt update files - Can't install SP1

Good. Please do the following again.

SFC Scan


  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.

Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.
 
Re: [Win7Pro] Corrupt update files - Can't install SP1

Thanks. Please do the following.

Step#1 - Run Windows Repairs
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
1. Download Windows Repair (All-in-One) Portable to your desktop.
2. Once the file is downloaded, right-click on the file on your desktop and choose Extract All...


Extract.JPG

3. Keep the defaults and click the Extract button.
4. A folder named tweaking.com_windows_repair_aio will be extracted to the desktop. Once the extraction is complete the folder will open.
5. Inside this folder, there is a folder named Tweaking.com - Windows Repair. Open this folder as well.
Capture.JPG



6. Double-click on Repair_Windows.exe to open.
7. When the program opens click the Repairs tab and click the Open Repairs button.
8. A backup of your registry will be made. After a few moments you will have many options from which you can choose.
9. Please click the Unselect All button and then click to enable only the following ones:


05 - Repair WMI


10. Ensure the Restart check box is selected and click the Start Repairs button in the lower right of the screen. This may take some time to run so be patient.
StartRepairsWithReboot.JPG

11. Once the fixes are complete you will be prompted to restart your machine. Answer Yes.
 
Re: [Win7Pro] Corrupt update files - Can't install SP1

Should I attempt the sp1 install again?
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top