[SOLVED] [10v1607b14393 x64] Can't upgrade to 1703/1709. No any new driver (0x800703f1)

OK, boot to advanced settings...startup settings and boot into Safe Mode.

Once in Safe Mode, go to device manager via computer management, look within Display Adapters and find the graphic driver. Right-click on it and remove it (ensure you check the box to delete the actual drive). Ask any questions you have while doing this.
 
None that I'm aware of. The only thing that struck me as odd was that even before installing the driver there already as a "Radeon settings" menu item. Maybe some leftover? I ran the amdcleanuputility twice in the last few days.
 
OK, please do the following.

Step#1 - Gather Event Logs
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download SFCFix.exe (by niemiro) and save this to your Desktop. If you still have this on your desktop from downloading previously, you don't need to re-download.
  2. Download the file below, SFCScript.txt, and save this to your Desktop.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCScript.txt.
  5. Drag the file SFCScript.txt onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please
  9. In addition a file will be created on your desktop named EvtLogs.zip. As this file will likely be too large to attach to your reply, please upload this file to a file sharing/hosting site such as SendSpace, Dropbox or Onedrive and provide the link in your next reply.
 

Attachments

Please do the following.

FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download attached file and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
 

Attachments

Please do the following.

FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download attached file and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
 

Attachments

Result:
Code: 
Fix result of Farbar Recovery Scan Tool (x64) Version: 21.01.2018
Ran by Keiner (23-01-2018 07:41:48) Run:5
Running from C:\Users\Keiner\Desktop
Loaded Profiles: Keiner (Available Profiles: Keiner)
Boot Mode: Normal
==============================================

fixlist content:
*****************
cmd: vssadmin delete shadows /all /quiet
CreateRestorePoint:
Cmd: wevtutil cl application
Cmd: wevtutil cl system
Cmd: wevtutil cl security
Reboot:

*****************


========= vssadmin delete shadows /all /quiet =========

vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.


========= End of CMD: =========

Restore point was successfully created.

========= wevtutil cl application =========


========= End of CMD: =========


========= wevtutil cl system =========


========= End of CMD: =========


========= wevtutil cl security =========


========= End of CMD: =========



The system needed a reboot.

==== End of Fixlog 07:42:11 ====
 
EvtLogs.zip attached. Includes a Windows restart and apparently an updated started in the background.
 

Attachments

I tried the update some two hours ago and the problem still persists :( Perhaps we are missing someting and it's not really the graphics driver but something else that slows down the system or prevents normal operation? Would it be possible to collect more information via the command prompt after the update?

On another note: now as I can install drivers again, in particular the printer driver, there is no immediate need to update. Do you want to continue and hunt down the issue? I would be willing to but I don't want to steal too much of your time.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top